Recommended Roof Rack for a 2024 Ford Edge w/ a Glass Roof and No Side Rails

Question

Question:

I have a 2024 Ford Edge with a glass roof and no side rails. Can I use these to add a roof rack?

asked by: David J

0

Expert Reply:

You sure can! The Rhino-Rack ROC25 Roof Rack for Naked Roofs item # RR26XR does fit the 2024 Ford Edge with or without a glass roof. You do not need side rails to install this roof rack. It includes custom fit clips that attach to the inside of your door jams.

I have attached a picture below so you can see what this roof rack looks like once installed.

expert reply by: Jerred H

0

2024 Ford Edge w/ a Glass Roof
(click to enlarge)

Answer 1

You are definitely correct in saying that the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars #RR26XR fits your glass, naked roof on your 2015 Ford Edge Sport. As far as being able to open your roof with the ROC25 installed, there…

view full answer...

Answer 2

The etrailer trailer hitch I recommend for your 2022 Ford Edge is the part #e36RR because it has a hidden crosstube as well as a higher weight rating. This means you have a better looking hitch setup with better ground clearance and a higher weight…

view full answer...

Answer 3

The Rhino-Rack ROC25 Roof Rack for Naked Roofs part #RR26XR which is a fit for a 2016 Ford Edge is capable of supporting up to 165 lbs. The roof top tent manufacturer should then specify what the roof rack is capable of holding for compatibility. For…

view full answer...

Answer 4

Hi Kathy; the Rhino-Rack ROC25 Roof Rack #RR26XR will clamp onto the door jambs on your 2018 Ford Edge SEL. When the door is closed the seal might press up onto the clamp but it won't hurt or damage the seal.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Roof Rack for a 2024 Ford Edge w/ a Glass Roof and No Side Rails

Continue Researching