Recommended Suspension Enhancement for a 2024 Honda CR-V

Question

Question:

Are there any suspension upgrades for a 2024 Honda CR-V

asked by: Steven S

0

Expert Reply:

For your 2024 Honda CR-V I recommend checking out the Air Lift 1000 Air Helper Springs for Coil Springs # AL98WQ. These springs have a 1,000 lb load leveling capacity, has an adjustable air pressure range of 5 psi to 50 psi, and installs inside your vehicle's rear coil spring suspension.

To control and monitor the air pressure of your springs you're going to need a compressor # AL25592.

expert reply by: Bryce D

0

Answer 1

Hey Emanuel, so I have a video attached to this page that will show you the process but it's not of the exact kit part #AL98WQ that you asked about. The process is basically identical though as it's basically just about getting the air bag…

view full answer...

Answer 2

Adding the Air Lift 1000 Air Helper Springs #AL98WQ to the rear suspension on your 2024 Honda CR-V will allow you to control the rear end sag. The air springs allow you to add air into the bags which presses into the gaps between the springs pushing…

view full answer...

Answer 3

The only suspension enhancement option we currently offer for a 2021 Honda CR-V are from Air Lift, the Air Lift 1000 Air Helper Springs for Coil Springs part #AL98WQ which are what I recommend. I recommend these because they are adjustable so you can…

view full answer...

Answer 4

Let's start with your question about inflation, and yes, you you will need to continually inflate the Air Lift springs that fit your 2018 Honda CR-V, which are the Air Lift 1000 Air Helper Springs for Coil Springs #AL98WQ. The reason for that is…

view full answer...

Answer 5

Hey Leonard, yes the Air Lift 1000 air helper springs part #AL98WQ is two air bags and enough for both sides of the rear axle.

view full answer...

Answer 6

The Air Lift 1000 Air Helper Springs #AL98WQ are going to be the best way to fight rear end sag on your 2024 Honda CR-V. These will allow you to adjust the air pressure in the bags to reduce the amount the rear suspension sags. The Air Lift…

view full answer...

Answer 7

You are able to use the Air Lift Upgrade Kit #AL52300 to upgrade the air lines you attach to the Air Lift 1000 Air Helper Springs #AL98WQ. To connect the air lines you will need to use a short portion of the included nylon lines or locate the correct…

view full answer...

Answer 8

The Air Lift 1000 Air Helper Springs #AL98WQ are the best solution for reducing the rear end sag you are getting on your 2024 Honda CR-V. These air springs will fit inside your current coil springs and provide support to reduce how much the…

view full answer...

Answer 9

I took a look at the online version of the owner's manual for your 2018 Honda CR-V. Under the "Towing a Trailer" section it lists a maximum trailer weight of 1,500 pounds. This is the heaviest trailer your CR-V can safely pull. In order…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Suspension Enhancement for a 2024 Honda CR-V

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching