Is the Trxstle CRC System Rooftop Fly Rod Carrier the Version 3.0?

Question

Question:

Is this CRC rod carrier version 3.0? And it comes with clamps right?

asked by: Steve

0

Expert Reply:

Yes, the Trxstle CRC System Rooftop Fly Rod Carrier # TRX57FR is the version 3.0. It does include the standard clamps to attach to the rooftop crossbars. We also have the XL Clamps # TRX84FR for 1-3/4" to 2-1/8" Diameter Crossbars.

expert reply by: Bud M

0

Answer 1

I spoke with the manufacturer and was informed that the Trxstle CRC System Rooftop Fly Rod Carrier #TRX57FR will have a total height of 9" from the crossbar to the top of the reel portion.

view full answer...

Answer 2

The Rhino-Rack's Locking Fishing Rod Carrier #RR574F is great product that will work wonderfully for your application, you can't go wrong purchasing this product. This has universal mounting hardware that fits all popular roof rack bar…

view full answer...

Answer 3

Hi Jake in Roanoke! Yes, the RodVault 2 #TH34FR23YR is compatible with the factory crossbars on your 2024 Crosstrek. It clamps securely onto round, square, and aero-style bars, including Thule’s WingBar Evo or your OEM bars. One note though: the…

view full answer...

Answer 4

The Yakima ReelDeal #Y04089 is the only rod holder that has the lifter brackets #Y8860037 to lift the carrier to gain extra clearance. You could get the Yakima FatCat #Y03095 which has lifter brackets built in. This is marketed towards ski and…

view full answer...

Answer 5

Hi Tom, There are different laws for flat towing a vehicle and trailer a towing so depending on where you live or where you plan on travelling to you may or may not need a supplemental braking system. We always recommend one regardless because…

view full answer...

Answer 6

The difference between the Yakima HD Crossbars like the #Y74MR and the regular Yakima Tracks like the #Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD…

view full answer...

Answer 7

The T-slot channel dimensions for the Yakima HD Crossbars #Y01158 are 11mm (7/16") wide on top, 8mm(5/16") deep, and 22mm(14/16") wide at it's bottom. I attached a picture of the HD crossbar's diagram as well as a video with…

view full answer...

Answer 8

The Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 #Y8880184 will fit in the channels of your HD bars, but for the most part, crossbar mounted accessories will come with (or have available) T-channel hardware that will…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Glad you reached out Marcos, happy to help! If the side bolts will start but the bottom bolts won't, the most common causes are either slight hitch misalignment or debris in the factory weld nuts. I'd recommend loosening the side bolts and…

view full answer...

Is the Trxstle CRC System Rooftop Fly Rod Carrier the Version 3.0?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching