Recommended Hitch for a 2024 Lexus RX 350

Question

Question:

What hitch fits a 2024 Lexus RX 350?

asked by: Kyle

0

Expert Reply:

As of 1/10/24, the only hitch available for a 2024 Lexus RX 350 is the Curt Trailer Hitch item # C29VV. This hitch is custom fit and bolts to your Lexus with included hardware. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity, and a 350 lbs maximum tongue weight.

If you are planning on towing you will also need a wiring harness item # 119250KIT and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Answer 1

No, it does not. The Draw-Tite Hitch item #DT73QR does not require you to drop the exhaust when installing it on your 2023 Lexus RX 350. I have linked the instructions below so you can take a look at them.

view full answer...

Answer 2

For your 2024 Lexus RX 350 we have the Draw Tite hitch part #DT73QR that I would recommend highly. This hitch is mostly hidden as only the hitch opening hangs below the rear bumper and it has the best towing capacities.

view full answer...

Answer 3

We have a hitch for your 2023 Lexus RX 350h with the Curt part #C29VV but the Draw Tite you mentioned does not work. The Curt would still allow the rear kick sensor to open the rear tailgate but you would have to kick to either side of the hitch.

view full answer...

Answer 4

I don't consider the Curt Trailer Hitch Receiver #C29VV as a concealed hitch since the cross tube is still visible below the vehicle fascia. Currently I do not see that we offer a receiver with a fully hidden cross tube or removable receiver for…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Hitch for a 2024 Lexus RX 350

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching