Replacing The Light On A Ventline Pinnacle Ductless RV Range Hood # VE48SR

Question

Question:

I have this range but dont know how to replace the led light on it. My light went out and Im trying to replace it.

asked by: Demesha S

0

Expert Reply:

The light for the Ventline Pinnacle Ductless RV Range Hood with Light # VE48SR is encased in plastic that pops into slots in the vent. To get a replacement you would need to reach out to Ventline since it's not a generic light. Once you get the light you can pop the old one out and remove the connection to the switch and swap in the new light.

expert reply by: Kevin C

0

VE48SR Light
(click to enlarge)

Answer 1

The light on the Ventline Pinnacle Ducted RV Range Hood with Light #VE38SR is an integrated 12V LED light so it's not going to be replaceable, but as long as the actual LEDs work, the wires that feed the light can be easily fixed and repaired.

view full answer...

Answer 2

I do have a potential solution for you. Now I do not have any light fixtures made specifically for a range hood, we do have other surface mount lights which may work for your application. The Great white LED utility light #PE63FV would be a great…

view full answer...

Answer 3

For your Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP85FR or #RP94716-61301 the grease fitting is a standard grease zerk. You can use #GZERK as a replacement. The threading of the zerk is 1/4-28.

view full answer...

Answer 4

Your current microwave has the dimensions of 29-15/16 W x 16-7/16 H x 15-3/8 D which is almost identical to the Furrion part #FMCM15SS which we know works really well and is reliable so it would be a really great and easy solution.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hi Jeremy! B&W does indeed have an option for your 2001 Ford F250. The B&W Patriot 5th Wheel Trailer Hitch w/ Slider and Universal Install Kit - Dual Jaw - 18,000 lbs #BW38XR is a sliding hitch, which is recommended for short bed trucks, and…

view full answer...

Replacing The Light On A Ventline Pinnacle Ductless RV Range Hood # VE48SR

Product Page this Question was Asked From

Continue Researching