2022 Ford F-250 Super Duty Crew Cab Black Floor Mat Recommendation

Question

Question:

My 2022 F-250 is a crew cab and has bucket seats in the front. I'm looking to get some custom fit floor mats in a black color and am looking for a recommendation. It's a work truck so I want something durable and easy to clean.

asked by: Randall

0

Expert Reply:

Thank you for all of the info on your 2022 Ford F-250 Super Duty! For your application I recommend the following:

- WeatherTech HP Front Auto Floor Mats # WT4410121IM
- WeatherTech HP 2nd Row Rear Auto Floor Mat # WT79PR

I really like the HP version of floor mats that WeatherTech came out with because they put a high wall design on it so it's perfect for a work truck where people will be dragging in elements on their boots. The high walls will keep any residual water or debris from escaping the floor mat until you're able to clean them with soap and water.

To clean the mats you can either do this by hand or even use a power washer to get them looking brand new again!

expert reply by: Jon G

0

Answer 1

Hello Stephen, thanks for reaching out. Yes, there is a Blue Ox base plate available for the 2025 Chevy Trax. There are different part numbers depending if your vehicle has the ACTIV feature, so please choose from the following: - Blue Ox Base Plate…

view full answer...

Answer 2

The Hitch Pin and Clip For 2-1/2" and 3" Hitches #337HP6256WC doesn't have a weight rating, but this is normal for a pin setup. These are tested to hold the weight ratings of the hitches they are made for so as long as you're…

view full answer...

Answer 3

Hey Eric, thanks for reaching out! As long as the hitch on your Class C RV is rated for weight distribution, you can use the Curt Round Bar Weight Distribution System #C17063 with no issues. When it comes to using it with the 2-1/2" receiver on…

view full answer...

Answer 4

So there isn't a 6 inch hitch extender for a 2 inch hitch that has an 11,000 lb capacity and 1,200 lb tongue weight capacity, and hitch extenders also reduce the capacity of your hitch by 50 percent, so they are generally just used for…

view full answer...

Answer 5

The Curt Heavy Duty Forged Ball Mount #C93JR does not include a hitch pin and clip. I have sent in an update to have that corrected, thank you for pointing out the error on our site. We have a few options depending on what you are looking for. The…

view full answer...

Answer 6

Hey Bert, yes the etrailer hitch sleeve reducer part #e28JR will work great for you when towing a 7,500 lb travel trailer. Your WD system will put so much torque into the hitch tube that it will not slide around at all and it will be pinned in place…

view full answer...

Answer 7

No, the etrailer Magnetic Hitch Reducer item #e28JR won't slide around. That slot is put in for convenience to make it easier to insert a pin. The two magnets mounted to the bottom are what keeps it from sliding around. The purpose of the magnets…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...