Recommended Retractable Tonneau Covers for a 2023 Ram 2500 Limited w/ a 6-1/2 Foot Bed and RamBoxes

Question

Question:

Do you have the retract cover to fit 2023 2500 limited with ram box and short bed? Thanks!

asked by: Vince

0

Expert Reply:

Yes, we do! We actually have nine different options for retractable tonneau covers that fit the 2023 Ram 2500 Limited with the short 6-1/2' bed and RamBoxes. Five of them are manual and four of them are powered. I have listed them all below:

Powered Retractable Tonneau Covers

PowertraxONE MX Hard Tonneau Cover - Powered - Polycarbonate - Matte Black item # RT70235

PowertraxPRO MX Hard Tonneau Cover - Powered - Aluminum - Matte Black item # RT90235

Pace Edwards Bedlocker Retractable Hard Tonneau Cover - Electric - Matte Black item # 311-M-BLD87A08

Pace Edwards Bedlocker Retractable Hard Tonneau Cover - Electric - Aluminum - Black item # 311-BLD87A08

Manual Retractable Tonneau Covers

RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black item # RT80235

Pace Edwards JackRabbit Retractable Hard Tonneau Cover Aluminum and Vinyl - Matte item # 311-M-JRD87A08

Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black item # 311-JRD87A08

Pace Edwards Full-Metal JackRabbit Retractable Tonneau Cover - Aluminum - Matte Black item # 311-M-FMD87A08

Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover - Aluminum - Black item # 311-FMD87A08

expert reply by: Jerred H

0

Answer 1

There is a retractable tonneau cover for your 2020 Ram 2500 with a 6-1/2 foot bed, Ram Box and Cargo Management System that will allow you to keep the rails on your truck and not have to remove them. The rails will be used as a way to install the…

view full answer...

Answer 2

The main difference is that the Pace Edwards JackRabbit #JEF6985-CR4008 uses vinyl over the aluminum panels, while the Pace Edwards Full-Metal JackRabbit #FEF6985-CR4008 uses a strong black powder coat paint over the aluminum panels. I personally…

view full answer...

Answer 3

According to my research the BAK Revolver X4s #BAK74ZR and the BAKFlip MX4 #BAK48204 from a 2018 Ram 3500 will fit the 2022 model year as long as both have the same bed length and RamBox option (the ones listed above fit the 8' bed). The only…

view full answer...

Answer 4

The rails of the TruXedo Sentry Hard Tonneau Cover #TX1547901 are going to sit inside of the bed approximately 3" with only just a little lip sitting on the bedrails (3/8" in length) to prevent water from getting into bed. Per the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Recommended Retractable Tonneau Covers for a 2023 Ram 2500 Limited w/ a 6-1/2 Foot Bed and RamBoxes

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching