Parts Needed to Add Brake Controller to 2024 Hyundai Palisade

Question

Question:

I want to use a brake controller with my 2024 Palisade. I already have a hitch but that is it. What do I need to add the controller?

asked by: Mike L

0

Expert Reply:

Adding a brake controller to your 2024 Hyundai Palisade will require 7-way wiring. You can accomplish this using the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK64CR. This kit comes with everything you need to install a 7-way on your vehicle. The wiring harness also comes with a plug that is compatible with Tekonsha brake controllers like the Prodigy P3 # 90195 for quick and easy installation.

expert reply by: Robin H

0

Answer 1

I recommend installing the Redarc Tow-Pro Liberty Brake Controller #RED24FR on your 2024 Hyundai Palisade because it gets you a proportional braking system that remains hidden and out of the way inside your vehicle when you don't need to use it.…

view full answer...

Answer 2

If you have a 7-way already then you only need the brake controller. There are no aftermarket plug and play wiring harnesses for installation so installing one like the #90195 will require splicing. The only exception would be if they actually used…

view full answer...

Answer 3

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

view full answer...

Answer 4

The recommended torque spec for etrailer electric trailer brakes #AKEBRK-35-SA is 45 to 70 foot pounds. For compatible nuts and lock washers use #BRKH10B.

view full answer...

Answer 5

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 6

The psi of your trailer tires will be listed on the side wall. It will list the max psi which is what you will want to fill them to regardless of how much weight you have. For reference, the 4.80 x 12 tires we carry have a 60 psi max for load range B…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Parts Needed to Add Brake Controller to 2024 Hyundai Palisade

Featured Help Information

Miscellaneous Media

Continue Researching