Replacement For 20.5 x 8 - 10 Trailer Tire & 5-Bolt Wheel
Published 11/08/2023
Products Featured in This Question
Question:
What is the replacement trailer tire size and wheel size for 20.5 x 8.5 -10 6 ply. The trailer has a 2200# rating on the torsion axle. The wheel has a 5 bolt pattern. I would also like to know what electric brake kits are available. Thank you
asked by: Dan M
Expert Reply:
To replace your 20.5 x 8 - 10 trailer tire you'll need a size 205/65-10, and for a 6-ply that is on a 5-bolt wheel use the following:
- Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range C # AM3H390
The # AM3H390 has a 1,100 lb capacity (meaning two would be 2,200 lbs), so you just want to be sure you have the same 5 on 4-1/2" bolt pattern. I have added links below to a help article on how to measure bolt pattern as well as a printable bolt hole template if that's easier for you.
Then for electric brakes for a 2,200 lb axle, what is available is the Dexter Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000- to 2,200 lbs # 23-47-48.
These are 7" diameter x 1-1/4" wide so that's what the inside of your drum should be, and mount to a 4-bolt mounting flange with 2-7/8" center to center hole spacing so you'll want to ensure you have that.
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 2200 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: cotter pins
- Search Results: dexter parking brake
- Search Results: trailer tongue lock
- Search Results: dexter trailer brakes
- Video: Review of the Dexter Electric Trailer Brakes
- Video: Dexter Breakaway and Parking Kit for Drum Brakes: The Breakdown
- Video: All You Need to Know About the Deka Heat Shrink Butt Connector
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Pre-Greased
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Search Results: 4 on 4 hub
- Search Results: axle grease
- Shop: Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Search Results: bearing buddy
- Shop: Replacement Zinc Cotter Pin for Fisher/Meyer/Diamond Snow Plows - 2" Long - Qty 1
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Q&A: Solution for Trailer Axle without Grease Fittings for Easy Install of Grease
- Q&A: How To Re-Pack Grease Trailer Wheel Bearings
- Q&A: 3,500 lb Trailer Axle Options for a Trailer that is 63 inches Wide
- Q&A: Largest Wheel and Tire Size Available to Fit on 2,000 lb Trailer Axle
- Video: An In-Depth Look at the Valterra Electrical Cable Hatch for RVs
- Video: Breaking Down the Valterra Telescoping RV Gravity Fill Water Inlet
- Q&A: How to Determine if 4-Lug Trailer Hubs can be Changed to 5-Lug Trailer Hubs
- Video: Setting Up Your etrailer Trailer Idler Hub Assembly for 2K Axles
- Q&A: Replacing Bearing Seals on Older DICO Hub and Drum
- Video: Deka Butt Connectors Detailed Breakdown
- Q&A: What Size are the Dexter Electric Trailer Brakes K23-103-104-00?
- Article: Trailer Wiring Diagrams
on Trailer Brakes
