Does Draw Tite Hitch # 76134 Have Second Hole for J-Pin Anti-Rattle

Question

Question:

Does this hitch come with a j-pin hole?

asked by: Alex Z

0

Expert Reply:

The Draw Tite hitch part # 76134 does not come with a second hole near the hitch pin hole to be used with a J-pin anti-rattle device. You'd need to use it with an anti rattle like the # 63232 which fits into hollow shank hitch accessories.

expert reply by: Jameson C

0

Answer 1

As far as the maximum gross towing weight rating of your 2013 Toyota RAV4, you are correct that it is only rated for 1,500 pounds. For the hitch construction, the particular 2" hitches that are available for a 2013 RAV4 also fit newer models of…

view full answer...

Answer 2

Of course! I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver #76134 and the Curt T-Connector Vehicle Wiring Harness #C56350 for your 2017 Toyota RAV4. The Draw-Tite has a hidden crosstube and is a very reliable trailer hitch while the…

view full answer...

Answer 3

The Curt Class III trailer hitch #C13119 does have a 350-lb tongue weight (TW) rating as you noted, and that capacity must be enough for the weight of the bike rack itself plus that of your loaded bikes. A substantial 4-bike rack like the Hollywood…

view full answer...

Answer 4

For your 2018 Toyota RAV4 I recommend the Curt Trailer Hitch Receiver - 2" #C13149. This hitch is a custom fit for your vehicle, is easy to install, and will allow you the hands free liftgate function. The sensors will work well on either side…

view full answer...

Answer 5

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 6

The differences between the between the Curt #C13149 and the Curt #C13406 for your 2017 Toyota RAV4 are that the 13149 has a visible crosstube and is rated for use with a weight distribution system while the 13406 has a concealed crosstube (for a…

view full answer...

Answer 7

Hello John. The Blue Ox Trailer Hitch Receiver #BLU63UR will fit the following vehicles: 2006 - 2018 Toyota RAV4

view full answer...

Answer 8

The Curt hitch part #C13406 and EcoHitch part #306-X7219 are both a confirmed fit for your 2018 Toyota RAV4 and will provide a trailer hitch that has a concealed crosstube making it less visible than most hitches overall. The key differences are that…

view full answer...

Answer 9

Yes, we do. I recommend Curt, part #C13406. It's a fit for all of the 2018 RAV4's including the Hybrid model like you have. I like how the crosstube is hidden behind the RAV4's bumper and all you see is the receiver tube sticking out.…

view full answer...

Answer 10

I compared ground clearance measurements for all of the 2" trailer hitch receivers we have for your 2017 Toyota RAV4 and found that the Curt Trailer Hitch Receiver part #C13406 has a great clearance from the ground to the top of the hitch…

view full answer...

Answer 11

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Does Draw Tite Hitch # 76134 Have Second Hole for J-Pin Anti-Rattle

Products Featured in This Question

Continue Researching