Will The etrailer Enclosed Trailer Transition Plate e32JR Work For Loading/Unloading A Motorcycle?
Updated 02/26/2024 | Published 11/02/2023
Products Featured in This Question
Question:
I didnt see anywhere in the add or in the answered questions about the use of the e32JR for loading and unloading motorcycles. I have 2 HD motorcycles one weighs about 850 pounds and the other weighs around 650 pounds. I haul them in a dedicated built to haul motorcycles trailer. Thanks for the help.
asked by: Larry
Expert Reply:
The etrailer Enclosed Trailer Transition Plate # e32JR will work very well for loading and unloading motorcycles. It has a working load limit of 1,000 lbs so even with your 850 lb bike, you are well within parameters weight capacity wise. Especially since only a fraction of the full weight of the bike would be on the plate at once.
The plate will create a smooth transition, even with smaller wheels like on a dolly or cart. So with motorcycle tires it is going to make loading and unloading extremely smooth and easy. Some folks will even use two transition plates. One going from the ground to the door, and another covering the gap between the door and the deck of the trailer if needed.
I have linked our review and installation video below if you want to take a look.
Product Page this Question was Asked From
etrailer Enclosed Trailer Transition Plate - Universal - 1,000 lbs - Qty 1
- Trailer Door Parts
- Transition Plates
- Bolt-On
- Steel
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: etrailer Enclosed Trailer Transition Plate - Universal - 1,000 lbs - Qty 1
- Video: Ultimate Overview of the etrailer Enclosed Trailer Transition Plate
- Shop: Caliber EdgeGlide 2.0 Transition Plate for Enclosed Trailers - 48" Long - Qty 2
- Video: Checking Out the etrailer Enclosed Trailer Transition Plate
- Video: Feature Review etrailer Enclosed Trailer Transition Plate
- Shop: Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor
- Video: B and B Bottom Rear Corner Trim for RV Seam Review
- Shop: Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs
- Q&A: Can I Use The etrailer Enclosed Trailer Transition Plate e32JR For Loading A 2,000 lb Pallet?
- Search Results: rv trim
- Search Results: side marker trailer lights
- Search Results: transition plates trailer door parts
- Shop: Optronics LED Trailer Clearance or Side Marker Light w/ Reflector - 6 Diodes - Rectangle - Red Lens
- Shop: B&B Top Rear Corner Trim for RV Seam- Right Hand - Black
- Shop: Optronics LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Red Lens
- Search Results: ramp extension
- Search Results: dexter 69 47 axle
- Video: All You Need to Know About the 3" Wide Continuous Hinge
- Video: Optronics Rectangular LED Trailer Clearance and Side Marker Light with Reflector Review
- Q&A: Is 2 Inch Hitch Ball Okay to Use With 2-5/16 Inch Coupler
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Recommended Transition Plate For Enclosed Trailer Ramp Doors
- Q&A: Tie-Downs for 2026 Ford F-350 Long Bed With Factory Hitch
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: How Much Do the Caliber Edge Glide XL Transition Plates Weigh?
- Q&A: Can Caliber EdgeGlide Be Used Between Ramp Door and Trailer Floor
- Article: Trailer Wiring Diagrams
- Q&A: How Tall Is Side Lip On etrailer RapidRamps
- Article: Thank you!
- Article: Is It Illegal to Leave My Hitch on My Truck?
on Trailer Door Parts
Andy
2/26/2024
Great answer!