Detail K2 Snowplow for 2" Hitches K2AVAL8422. Will This Work On A Lifted Truck?

Updated 10/23/2023 | Published 10/22/2023

Products Featured in This Question

SnowBear Snowplow for 2" Hitches - 84" Wide x 22" Tall

(43)

$1895.55

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

(85)

$263.35

Question:

Detail K2 Snowplow for 2 Hitches - 84 Wide x 22 Tall Hello, I have a 2012 F250 6.7 powerstroke. I have a 6” lift and 37” tires on it. Will this plow be effective with a lifted truck?

asked by: Zach D

Expert Reply:

In order to use the Detail K2 Snowplow # K2AVAL8422, your front hitch must be between 13"-18" from the ground, when measured from the bottom of the receiver opening to the ground.

We installed the Curt front hitch # C31018 on a 2012 F250 where everything was stock, and the front hitch was at about 15-1/2". So with a 6" lift and big tires, this snow plow would likely not be effective. You can always measure your hitch to be sure, but your lifted truck will likely not be able to be used as a plow.

expert reply by: Jesse M