Replacement Bearings and Suspension Components For a 2016 Forest River Wildwood X-Lite 261BH

Published 10/17/2023

Products Featured in This Question

LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge

(274)

$10.77

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2950)

$15.39

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long

(2234)

$51.92

3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long

(2234)

$37.17

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long

(2234)

$62.24

LubriMatic Professional Pistol Grease Gun

(36)

$53.93

LubriMatic Deluxe Bearing Packer

(62)

$27.60

MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K

(823)

$198.44

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps

(2160)

$125.09

Seal Puller

(157)

$10.39

7-Piece Installation Set for Bearings, Races, and Seals

(245)

$47.63

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2

(2749)

$6.23

Question:

i have a 2016 forest river wildwood x lite WDT261BHXL VIN# 4X4TWDB24G7XXXXXX 5 lugs wheel. i and looking for parts to repack bearings. also looking for new extra heavy leave springs, shackles and swing arms. Can you help me find options to get this all fixed up?

asked by: Rusty P

Helpful Expert Reply:

If you are just going to be cleaning your hubs and packing the bearings with fresh Grease # L11390 you will want a set of Seals # RG06-050 for each of your 3,500lb axles. The Seal Puller # PTW1219 will make removing the seals easier once you have your hubs removed. We do offer the Bearing Packer # L70025 which will allow you to more easily squeeze the fresh grease into the bearings with the aid of a Grease Gun # L30416.

If you wish to install new bearings and races you will need 4 of our Bearing Kits # BK2-100 which will give you all new bearings, races and seals. Our Installation Set # PTW83020 will aid in the install of the races.

I have no way to tell the length of your leaf springs. We have them 23-1/8" # e59SR, 25-1/8" # e54SR and 27" # e97SR long from eye center to eye center. You will need to measure your leaf springs with the weight removed from the axles to get the most accurate measurement.

I recommend upgrading your equalizers to the MORryde Shock Absorbing Suspension Equalizers # MR27ZR for which you will also need the Wet Bolt Kit # MR46ZR. This will give you all new suspension components and the upgraded parts will help to cushion the shock and move more freely than the stock suspension.