What is Panel Length of BAKFlip that Fits 2011 Ford F-350 Long Bed

Question

Question:

What is the length when in the “folded up” position? I want to be certain I can tow my fifth wheel trailer with it “folded up” “not flipped up”.

asked by: Dean H

0

Expert Reply:

Each of the panels of the BAKFlip MX4 part # BAK48311 are 2 feet long. So when they are all folded up the panels would be 2 feet from the back of your truck cab.

expert reply by: Jameson C

0

Answer 1

Hey Brent, welcome back! I did some digging and the High Tide 2025 Jeep Gladiator is a Florida exclusive version that is very similar to the Sport model so for a Demco base plate kit you'd need the part #DM9519336. Then for a lighting kit we have…

view full answer...

Answer 2

For an absolutely amazing cover for your dually 2012 Ford F-350, I recommend the RetraxPRO MX Hard Tonneau Cover #RT80362 (6-3/4" beds) or the #RT80323 (for 8 foot beds). Not only does this cover allow you to open the it at any point of the…

view full answer...

Answer 3

The RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte #RT80323 will have a measurement of 11-5/8 deep by 13-3/4 inches long by 63 inches wide. I reached out to the manufacturer to confirm these dimensions and created a photo to…

view full answer...

Answer 4

I did some research and found that the Erickson O-Track Cargo Control System like part #EM59133 is very similar to the L-Track systems you referenced. The Erickson O-Track is 18 inches long and includes 2 Spring-loaded O-ring clips and mounting…

view full answer...

Answer 5

I called BAK industries to see if they had weight specifications for their tonneau covers. Unfortunately, they do not record these, but there is something that I can offer that might help. The BAKFlip F1, part #BAK72329, and the MX4, part #BAK48329,…

view full answer...

Answer 6

Hello Bob. We do have a good gas detector option for you, but the lp gas detector model 7719 is currently unavailable. What I recommend instead is the RV Propane Gas Detector #RS44FR. This is a pretty standard gas detector. Just keep in mind the…

view full answer...

Answer 7

The BAKFlip MX4 Hard Folding Tonneau cover that fits your 2018 Ram 2500 with 6-1/2 foot bed (and without the Rambox) is part #BAK48203. This is similar to the cover #BAK48311 that you referenced but that one is for long bed Ford pickups. The MX4…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 10

Hey Mark, since folding tonneau covers like the etrailer part #e73DR end up adding height to the top of the bed rails near the front of the bed they are not ideal for towing a fifth wheel trailer as the nose of the trailer is most likely going to…

view full answer...

Answer 11

Hey Chris, No, there isn't an upgrade kit for your Generation 1 MORryde StepAbove RV Steps to make them a Generation 2. There is a Replacement Leg for MORryde StepAbove RV Steps - 2nd Generation #MR36DR, but because the Generation 1 steps'…

view full answer...

What is Panel Length of BAKFlip that Fits 2011 Ford F-350 Long Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching