Solution to Install 7-Way and 4-Way on 2002 Toyota Tundra

Question

Question:

I have a 2002 Toyota Tunda do sell a 7 pin plug with a 4 pin made together. Or do you sell a 7 pin adapter that with plug in my stock wiring Harness. Is so I will use a 7 pin Adapter to a 4 pin.

asked by: Garland B

0

Expert Reply:

The only trailer wiring options we have for your 2002 Toyota Tundra is 4-ways like the part # 118378 which you could convert with a 7-way adapter like the part # 37185 which also happens to have a 4-way on the side of it like you wanted.

expert reply by: Jameson C

0

Answer 1

There isn't a plug-in 7-way for your 2002 Toyota Tundra but since you already have a 4-way you can add a 7-way by using the following: - Universal Installation Kit for Trailer Brake Controller #ETBC7 You'll plug your 4-way into the 7-way that…

view full answer...

Answer 2

Since the Hopkins 7 and 4-Way trailer connector #HM40975-11998 includes a hardwire harness it technically could be installed on any vehicle, including your 2002 Toyota Tundra with a 4-Way connector. But you will need to do some hardwiring and extra…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Solution to Install 7-Way and 4-Way on 2002 Toyota Tundra

Continue Researching