Does the Draw-Tite 76419 Hitch Fit a 2024 Chevy Equinox?

Question

Question:

Does the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 76419 fit the new 2024 Equinox?

asked by: Kerry

0

Expert Reply:

Yes, it does. The Draw-Tite Hitch item # 76419 is confirmed to fit the 2024 Chevy Equinox. This hitch is custom fit and bolts to your Chevy with included hardware. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity with a 675 lbs maximum tongue weight.

I really like this hitch because the crossbar mounts completely behind your rear bumper leaving only the 2" receiver exposed. This not only helps with ground clearance but it also looks better.

I have linked an installation video below to help you get this hitch set up.

If you are planning on towing you will also need a wiring harness item # 119250KIT and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Answer 1

The easier install between the Curt and Draw-Tite trailer hitch receivers for your 2023 Chevy Equinox is the Draw-Tite hitch, which is the following part number: - Draw-Tite Max-Frame Trailer Hitch Receiver #76419 The reason why is when installing…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

There is very little actual difference between the two trailer hitch receivers that fit your 2022 Chevy Equinox (non-diesel model), which are the following part numbers: - Draw-Tite Max-Frame Trailer Hitch Receiver #76419 - etrailer Trailer Hitch…

view full answer...

Answer 4

Hello Andrew. It looks like our installers have not had the privilege of doing an install on a 2025 Chevy Equinox. I see that the wiring harnesses that we do have in stock have the 6 pin connector. It looks like Curt is aware of this issue and is in…

view full answer...

Answer 5

The etrailer Class III Trailer Hitch #76419 will have a ground clearance dimension of around 11-1/2" between the ground and inside top of the receiver when installed on your 2020 Chevy Equinox. Based on the installs we have performed, this…

view full answer...

Answer 6

William yes, I can confirm that the Curt T-Connector Vehicle Wiring Harness #C88RV is what you'd need for your 2025 Chevrolet Equinox. If you're needing help with anything else, feel free to drop a comment before you go!

view full answer...

Answer 7

We had one customer come back and tell us that the safety chain loops of the Draw Tite hitch part #76217 occasionally do drag the ground. I wouldn't say it's a huge problem though as we've sold quite a few of these hitches and only had…

view full answer...

Answer 8

I do have a few items you can look for that will give you an idea as to whether or not your 2018 Chevrolet Equinox came equipped with the factory tow package (K5L) or not but the only sure fire way to tell would be to obtain your VIN and contact the…

view full answer...

Does the Draw-Tite 76419 Hitch Fit a 2024 Chevy Equinox?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching