Will Replacement Leg LC736514 Work with Happijac 4150

Question

Question:

Hello, will the LC736514 replace the 4150 model jack leg? I have the manual version.

asked by: Kathy R

1

Helpful Expert Reply:

Yes, we have confirmed this with Lippert/Happijac before. The replacement leg part # LC736514 will work on your Happijac 4150 system.

expert reply by: Jameson C

1

Answer 1

Hello Ray, Welcome to etailer, I'm glad you found us =) Since you're replacing a HappiJac 4150 jack, the correct replacement is the Replacement Jack for HappiJac Truck Camper Jack Systems #LC736515. This is a direct replacement for the 4150…

view full answer...

Answer 2

Hi Chris; the Replacement Jack for HappiJac Truck Camper Jack Systems #LC736514 is what you need to replace your 4150. The mounting holes will be the same as the jack you're replacing. What kind of truck and camper setup do you have?

view full answer...

Answer 3

Hey Art, you have a Happijac camper jack setup correct? If so then the part #LC736515 that you referenced would be the correct replacement jack you are in need of. Let me know if you have something different.

view full answer...

Answer 4

Barbara, for your Happijac 4150 jacks you can use the HappiJac Electric Truck Camper Jack System #LC736514-ELKIT to replace your current Happijac 4150s. These jacks have a 34 1/2" of lift, an 8,800 lb weight capacity, and is made in the USA.

view full answer...

Answer 5

For your 2005 Dodge Ram with a HappiJac system, in regards to whether or not the outer tube height would matter or not on the Replacement Jack for HappiJac Truck Camper Jack Systems #LC736515, no it would not matter.

view full answer...

Answer 6

The Replacement Jack for HappiJac Truck Camper Jack Systems #LC736515 is a replacement leg for the HappiJac Electric Truck Camper Jack System #LC736515-ELKIT that replaced the 4800 series jacks. These jacks lift 2" taller at 36-1/2" and are…

view full answer...

Answer 7

Hey Paul, The Torklift StableLoad can work with your current Timbren Severe kit, you will have no issue installing and both together work great. What the Torklifts are going to do is engage your overload springs sooner. It will help with sag but…

view full answer...

Answer 8

Yes, Replacement Cap Kit for HappiJac Manual Truck Camper Jacks #LC183332 is the correct kit. This is for your Replacement Jack #LC736514 (4220) or the complete setup HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs…

view full answer...

Answer 9

There is another solution, but unfortunately there is not a manual to electric conversion kit for the HappiJac 4160. You would need to upgrade your jacks to the HappiJac Electric Truck Camper Jack System #LC736514-ELKIT. The Manual-to-Electric…

view full answer...

Answer 10

Yes. Your HappiJac 4150 can be replaced with the HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs #LC736514-4. If you want to add the electric operation and motors to these jacks you can use the Manual-to-Electric Conversion…

view full answer...

Answer 11

Yes, the Replacement Jack for HappiJac Truck Camper Jack System part #LC736514 (Model 4220) will fit your HappiJac Truck Camper Jack System Model 4150. If you need a new gearbox/motor then we have that as well, the Replacement Motor and Gear Head…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will Replacement Leg LC736514 Work with Happijac 4150

Product Page this Question was Asked From

Continue Researching