Propane Hose To Replace A Marshall Gas Model 242-1752

Question

Question:

I have an camper that need a new propane hose to connect the 30 gal tank to switch. Current model is Marshall Gas Controls Model AF P/N P424#1752 Do you have a replacement?

asked by: Brian

0

Expert Reply:

I was able to find a little bit of information on this Marshall 242-1725. The info out there is pretty limited, but it appears it is a standard pigtail with a type 1 and a 1/4" NPT. If so you can replace it with a pigtail like the # 100473-20-MBS which is 20" long. Generally this will be plenty long to get from your tank to a regulator.

expert reply by: Jesse M

0

Answer 1

The correct replacements we offer for the Glo Brite Marker Lights 118A and 117R is the Trailer Clearance or Side Marker Light part #MC44AB for amber and part #MC44RB for red.

view full answer...

Answer 2

The Rear View Safety Color Monitor #RVS-6139Q will be able to support up to 4 cameras including the Rear View Safety Forward Facing Camera #RVS-776-FF-5P you mention, and comes with a mounting plate. To wire the monitor and the cameras, use the…

view full answer...

Answer 3

Hi Anny, 1. The Uniguard Elbow Kit part #65UGA2 is not compatible with 1 1/4" pipes, it's a dedicated 1 1/2" fitting. If you need to fit the UniGuard to a 1 1/4" pipe, they make a reducing slip joint washer that can connect the 1…

view full answer...

Answer 4

The difference between the prices of the JR Products Automatic Changeover LP Gas Regulators and Camco Automatic Changeover 2-Stage Propane Regulators are in the BTU per hour, which as you correctly noted, is important information. The JR Products…

view full answer...

Answer 5

You sure can Jim! You can definitely rewire the AC input to the WFCO Auto Detect RV Converter and AC/DC Distribution Panel item #WF86FR to isolate it from your inverter by installing an automatic transfer switch. For a 3,000 watt inverter, I…

view full answer...

Answer 6

According to my research, the Marshall HP424 does have a Type 1 connection (which connects to your propane tank) and a 1/4" Male NPT connection (which connects to a dual-stage regulator). So the hose you mentioned will work as a replacement, and…

view full answer...

Answer 7

The Reese Lift Bracket #RP21501 is rated for Reese weight distribution (WD) systems that have a tongue weight (TW) capacity, or rating, of up to 600 lbs. These are the brackets that would be used on a WD system like the Strait-Line #RP66082 which has…

view full answer...

Answer 8

You're absolutely right, it is kind of confusing to figure out which topper you need for your Slide-Out. In order to get the correct slide topper, your width measurement should include the width of the flange, which is the widest part of the…

view full answer...

Answer 9

The closest option we have to replace the problematic SL206M2 lights in your 2014 Forest River Cedar Creek Silverback 5th Wheel Trailer is the LED RV Interior Light - 9 Diodes - Surface Mount - White Housing - White #328-K-1050Q9 which are a little…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…

view full answer...

Propane Hose To Replace A Marshall Gas Model 242-1752

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching