What Is The Hole Size Opening For The Pendant Glass Shade # 277-000474 To Attach?

Question

Question:

I was looking at item #277-000474 I couldnt find where it told the dimension of the opening for the bulb at the top of the glass shade Thank you for your help

asked by: Debbie T

0

Expert Reply:

The Gustafson RV Wall and Pendant Light Shade # 277-000474 has a 1-1/4" hole in the top for attaching to the pendant and installing a light bulb.

expert reply by: Bud M

0

Answer 1

Hello Janel, I am sorry, the 277-000421 is no longer available because Gustafson quit making it. That is a super awesome light too, such a bummer! We do have the Gustafson 12V RV LED Pendant Light w/ Light Shade - 22-1/2" Tall - Clear Glass -…

view full answer...

Answer 2

Looks like our replacement shade part #277-000473 might be what you are in need of. If your current shade measured 6 inches tall and 4-1/8 inches in diameter this would be the correct fit. We also have the slightly larger part #277-000474 which…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

What Is The Hole Size Opening For The Pendant Glass Shade # 277-000474 To Attach?

Product Page this Question was Asked From

Continue Researching