Will The Alpha Systems Patch Kit Work On All TPO RV Roofs

Question

Question:

Does this work on any TPO manufacturers

asked by: Brandon M

0

Expert Reply:

The Alpha Systems Patch Kit for SuperFlex RV Roof Membranes # AL37CV is designed for TPO membranes so branding would not matter and you'd be good to go regardless of which brand your roof is.

expert reply by: Kevin C

0

Answer 1

The 3' x 2' Alpha Systems Patch Kit for SuperFlex RV Roof Membranes - White #AL37CV is not self-adhesive. It does come with self-leveling adhesive that you'd use, however.

view full answer...

Answer 2

The perfect solution for you is the Alpha Systems Patch Kit for SuperFlex RV Roof Membranes - White - 3' x 2' #AL37CV.

view full answer...

Answer 3

I recommend just using a patch kit like the Alpha Systems Patch Kit for SuperFlex RV Roof Membranes #AL57CV to cover the hole. Since you're planning on getting rid of your RV anyways this'll be the best, relatively inexpensive solution. This…

view full answer...

Answer 4

One way to identify the roof material type without removing it from your roof is to go to your vent fan and remove the inside trim cover. Manufacturers will typically pull it down and staple it to the vent opening. You can remove a staple or two if…

view full answer...

Answer 5

I don't know what type of roof is on your 2000 Dutchman Aerolite Cub TT however I can help you determine what roof you have. TPO is going to be on the thicker side (1.1mm - 2mm) than the EDPM membrane, and also has rubbery feel to it. EDPM on the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Will The Alpha Systems Patch Kit Work On All TPO RV Roofs

Product Page this Question was Asked From

Continue Researching