Recommended Weight Distribution Hitch For Towing a Jayco Jay Feather 21MML Travel Trailer
Updated 08/07/2023 | Published 08/05/2023 >
Products Featured in This Question
Question:
I am contemplating the use of a B and W Continuum weight distribution system on a Nissan Armada or Infinity QX80 to tow a Jayco Jayfeather 21mml. I have heard there may be some ground clearance issues for this unit. Is unit something your techs see as a viable solution for connecting this tow vehicle with this travel trailer? If so, is the correct configuration for this combination readily available.
asked by: Dennis G
Expert Reply:
If you choose to use the B&W Continuum Weight Distribution System you will need the Underslung 2" Hitch Kit # BW88FR. The Kit # BW53FR you found while being for an underslung trailer coupler comes with a 2-1/2" shank which will not fit the receiver on either a Nissan Armada or Infiniti QX80.
Personally I do not like the B&W system for both the ground clearance issue and the lack of sway prevention. B&W says by reducing rear end sag it prevents sway which I know is not always the case. Instead I recommend going with the Equal-i-zer Weight Distribution System # EQ37100ET. This hitch is rated for 600-1,000lbs of tongue weight and a total weight under 10,000lbs which is where the Jayco Jay Feather 21MML will end up when you have it loaded. The Equal-i-zer has been around for years and continues to be the weight distribution hitch all other brands try to compare themselves to.
Product Page this Question was Asked From
B&W Continuum Weight Distribution System w/ Sway Control - Underslung - 16K GTW, 1.6K TW
- Weight Distribution Hitch
- WD With Sway Control
- Hydraulic System
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Underslung
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- 1500 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- B and W
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Tonneau Cover
- Shop: B&W Continuum Weight Distribution System w/ Sway Control - Underslung - 16K GTW, 1.6K TW
- Q&A: Recommended Weight Distribution System for an Underslung Trailer Coupler
- Search Results: bw continuum
- Video: B&W Continuum Weight Distribution System Review
- Q&A: Comparing ProPride and B and W Continuum Weight Distribution for Winnebago Minnie FLX2306
- Q&A: How Low Does The B&W Continuum Weight Distribution System Hang Below The Trailer?
- Q&A: Comparing B&W and Blue Ox Weight Distribution Systems
- Q&A: What Does Underslung Coupler Look Like for Picking Out B and W Continuum Weight Distribution
- Q&A: Will a Longer Weight Distribution System Shank Work with B&W Continuum Weight Distribution System
- Q&A: Will B and W Continuum Weight Distribution Work Better Than Andersen
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Shop: B&W Continuum Weight Distribution System w/ Sway Control - Underslung - 16K GTW, 1.6K TW
- Shop: B&W Continuum Weight Distribution Load Bars - Standard Coupler
- Shop: A-Frame Trailer Coupler - Underslung - Thumb Latch - Black - 2-5/16" Ball - Weld On - 14K
- Shop: Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black
- Shop: Curt QuickPin No Latch A-Frame Trailer Coupler w/ Jack Hole - 50 Degree - 2-5/16" Ball - 14K
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: rv bumper 2 trailer hitch receiver
- Search Results: trailer hitch
- Search Results: adjustable rv trailer hitch
- Shop: Trailer Hitch
- Shop: Towing Mirrors
- Video: Review of the Curt Adjustable Trailer Hitch Receiver
- Video: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide: The Breakdown
- Search Results: rvs~501n

