Comparing Timbren Kits for 2022 Toyota Tacoma

Question

Question:

Hi, I am looking at the Timbren bump stops for my 22 Tacoma Long Bed. I am preparing for a new Wedge camper. With Build out it will wiegh about 800-1000 pounds. I am confused about the different products available. Can you recommend/explain the differences here? https://www.etrailer.com/susp-2022_Toyota_Tacoma.htm?furl=-pm-Timbren THanks!

asked by: James G

1

Helpful Expert Reply:

There is an interesting amount of Timbren kits that fit your 2022 Toyota Tacoma long bed. The part # TABSTRFK is a standard duty kit that comes with a U-bolt flip kit helps with ground clearance. # T72FR is a severe service kit for 3 leaf springs which means it's going to be really harsh, # T62FR is same thing but for 4 leaf spring packs. # TABSOSR is a standard duty kit which means it'll give best blend of support and ride quality. This would be what I would recommend.

expert reply by: Jameson C

1

Answer 1

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

view full answer...

Answer 2

The Timbren Active Off-Road Bumpstops #TABSOSR referenced in your question feature an assembled height of 4-5/8 inches. I have attached a short video review on this kit along with the written installation instructions that you can check out as well.

view full answer...

Answer 3

Hi Dana; the Timbren #TFR250SDJ are 6-7/8" tall including the mounting bracket. I see you went ahead and ordered the #TFRTT350J instead. Just a heads up, this is the severe service kit so it is designed for a constant heavy load like a slide-in…

view full answer...

Answer 4

To add a 1" spacer #A25723-90AH00 to the Timbren Active Off-Road Bumpstops #TABSOSR you were looking at for your 2014 Toyota Tundra you will need to purchase two grade 5 or 8 3/8" x 2-1/2" F/T UNC bolts from your local hardware store.…

view full answer...

Answer 5

The Timbren Active Off-Road Bumpstops - Rear Suspension - 3,600 lbs #TABSTRFK have bump stops and mounts that are 5-1/2 inches tall overall and u-bolts that are 8-1/4 inches long and 3-3/4 inches on center. I've attached a photo to assist. These…

view full answer...

Answer 6

For your 2013 Toyota Tundra that is towing a 6,500 lb travel trailer I'd go with the Timbren kit part #TABSOSR to help support the rear of it and reduce sag as this will give you up to an additional 3,600 lbs of support if needed. Other kits…

view full answer...

Answer 7

There are six different Timbren kits for suspension enhancement that all fit your 2018 Toyota Tacoma. Four are for the rear and two are for the front. Of the front two, part #TTOFTUN4 is designed for adding support when you put a snow plow on the…

view full answer...

Answer 8

We do have the Timbren Rear Suspension Enhancement System #TTORTUN4 for your 2005 Toyota Tacoma Pre-Runner 2wd. This kit has a rated capacity of 6,000lbs to reduce sag and improve stability. We also have the Timbren Active Off-Road Bumpstops #TABSOSR…

view full answer...

Answer 9

Hey Carlos, Yes, installing the Timbren Suspension Enhancement System #T45MR will affect your ride quality and handling while off-roading in your Tundra. These springs provide a cushion between your frame and axle so that the harsh bumps over rough…

view full answer...

Answer 10

Suspension enhancement systems like Timbren springs are perfect for the scenaro you're describing. These solutions supplement your factory suspension but don't necessarily increase your capacity. Timbrens are hollow rubber springs that sit…

view full answer...

Answer 11

Due to the design of the Timbren Rear Suspension Enhancement System #TTORTAC4A on your 2002 Toyota Tacoma the screw that would normally sit in that position is welded on as you do not have access to the head of the screw when it is installed on your…

view full answer...

Answer 12

For your 2018 Chevy Colorado ZR2 Diesel I recommend RoadActive Suspension #RAS4617. This system will provide extra support when towing and/or carrying loads in the truck bed as well as help with overall stability all without affecting the unloaded…

view full answer...

Comparing Timbren Kits for 2022 Toyota Tacoma

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching