Replacement Leaf Springs and Hardware for 2008 Venture Boat Trailer

Published 07/26/2023

Products Featured in This Question

etrailer Rubber Hitch Cover for 2" Trailer Hitches - Qty 1

(3314)

$11.60

CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc

(1030)

$28.96

CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc

(1030)

$42.43

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long

(2228)

$62.24

Question:

Im looking for boat trialer parts for my 2008 venture boat trialer , squares axel. I need all new springs and hardware . Can you help?

asked by: Peter W

Expert Reply:

To find replacement leaf springs you will need to know your axle capacity along with the length of your current leaf springs. If you don't already know the axle capacity I would try checking the axle tag to see if it is listed. If not, you can call Venture with the VIN and they should be able to tell you.

Once you have the capacity go ahead and measure the length of your leaf springs. This is the spring eye to spring eye measurement. I have attached an article below which has a video showing how to measure.

For example, if you find that the capacity is 3,500 lbs and you have a 27" long leaf spring you could replace them with the # e97SR. For mounting hardware you can use the CE Smith U-Bolt Kit # CE23102 for 1-1/2" square or # CE23103 for 2" square axles.

In addition to some help articles I have attached an installation video along with a link to all of our leaf springs below. You can filter by length and capacity to find the right replacement.

expert reply by: Robin H