Replacement Cap For Dexter DX Series Electric Over Hydraulic Actuator

Question

Question:

I need a reservoir cap for my Dexter dx electric over hydraulic brakes

asked by: Jim P

0

Expert Reply:

We have exactly what you need to replace the cap on your Dexter DX Series electric over hydraulic actuator; the correct part is the following:

- Replacement Fill Cap # K71-685-00

expert reply by: Kyle S

0

Answer 1

I do have an option for you but there is not a good option for a license plate mount that will hook over one of the rungs of your ladder. The only way to attach the a license plate to the ladder, is a bracket like part #A90416 and to use metal or…

view full answer...

Answer 2

Hey Evan, Yeah I totally understand as some of those Jensen units are known to have some issues. Really the only similar option we offer is the Furrion RV Stereo w/ DVD Player #DV3300. It's a quality unit that will actually play your TV through…

view full answer...

Answer 3

The Telesteps Folding Ladder #TE27FR is going to be a bit too tall to work with a 2" tall space so you would to store it in a different area of your camper. When folded closed the dimensions are 4-1/2" x 3" x 7'.

view full answer...

Answer 4

The reason the Jensen Mechless RV Stereo JWM30 is in the videos for the #JEN25RR is because they are the same stereo. JWM30 is the Jensen part number and #JEN25RR is the etrailer part number so there is no difference between them.

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Douglas! The correct Gen-Y gooseneck pin box for your 2022 Forest River Cardinal Red is the #GY72SB. This fits the Rhino bolt pattern and is rated for trailers with a GVWR of 7,275-16,360 lbs. You will also need safety chains #GY49GR to complete…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hello Branden, Great question. I recommend going with the B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package - Dual Jaw - 20K #BWRVK3370 because it will go right into your puck system. The Patriot does not have that…

view full answer...

Replacement Cap For Dexter DX Series Electric Over Hydraulic Actuator

Product Page this Question was Asked From

Continue Researching