How to Get Rid of Too Large of Gap Between Frame and SumoSpring

Question

Question:

2014 silverado 4x4 with the black sumos. Air gap is 1 1/2”. But how do i reduce this gap?

asked by: Manuel

0

Expert Reply:

If you aren't using the included spacer of your kit you would want to. Ideally you want 1/4 inch to 1/2 inch of gap between the SumoSpring and the contact point on the vehicle. Since you are right at 1-1/2 inch that would indicate you are probably not using the spacer.

expert reply by: Jameson C

0

Answer 1

Hi Edward, The SumoSprings Solo Custom Helper Springs #SS65FR is listed as not a fit for Trail Boss or ZR2 models so you would want to swap out those jounce springs for the SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA28. This…

view full answer...

Answer 2

The SumoSprings part #SS45FR are a fit for your 2020 Chevy Silverado 1500 Trail Boss that has the factory lift and does not require any spacers.

view full answer...

Answer 3

Hey Jeff, yes the SumoSprings kit part #SS45FR that you referenced is a confirmed fit for your 2024 GMC Sierra 1500 Elevation that has composite leaf springs.

view full answer...

Answer 4

Hello John, Looks like you already found the right fit. The SumoSprings Solo Custom Helper Springs - Rear Axle #SS45FR is a great fit for your 2023 Chevrolet Silverado 1500. With having the 2" lift I am going to need a measurement from you to…

view full answer...

Answer 5

For your 2022 Chevy Silverado 1500 LTD Trailboss you can either use the SumoSprings #SS65FR which is rated for 1,000 lbs or the SumoSprings #SS45FR which are rated for 1,500 lbs. I honestly just recommend going with the higher rating. SumoSprings is…

view full answer...

Answer 6

The correct Timbren Rear Suspension Enhancement for your 2021 GMC Sierra 1500 AT4 is the Timbren Rear Suspension Enhancement System #TGMRCK15S you were looking at which has an 8600lb load rating, but I have a different option for you. I recommend…

view full answer...

Answer 7

With the SumoSprings Solo Custom Helper Springs #SS45FR or #SS65FR installed on your 2021 Chevrolet Silverado 1500 with no additional cargo weight you will see 1/2" of clearance between the spring and your axle pad. This allows for you to have a…

view full answer...

Answer 8

The SumoSprings Solo Custom Helper Springs #SS45FR will be noticeable at times when driving your 2022 GMC Sierra 1500 Limited unloaded. The springs will have an air gap between them and your axle when you have no additional weight on the rear…

view full answer...

Answer 9

Is this a body lift or a suspension lift? If it's a body lift which increases the distance between the frame and the body mounts, the lift won't affect which SumoSpring product you need. If that's what you have, I'd recommend the…

view full answer...

Answer 10

I reached out to my contact at SuperSprings to determine the best helper spring for your 2021 Trailboss truck. You were comparing the SuperSprings #SS45FR with the SuperSprings #SS65FR. These helper springs will have about a 1" gap before they…

view full answer...

Answer 11

The SumoSprings Solo Custom Helper Springs #SS45FR and SumoSprings Solo Custom Helper Springs #SS65FR both have the same fitment but have different weight capacities. The #SS45FR is rated for 1,500lbs while the #SS65FR is only rated for 1,000lbs.

view full answer...

Answer 12

For your 2021 Chevrolet Silverado 1500 Trail Boss, I recommend using the SumoSprings Solo Custom Helper Springs - Rear Axle item #SS45FR over the Timbrens. There are no compatibility issues with your Trail Boss edition Silverado. The SumoSprings have…

view full answer...

How to Get Rid of Too Large of Gap Between Frame and SumoSpring

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching