SnapPad SnapJack Mounting Hole Spacing

Question

Question:

What is the center distance between the two holes? For the snapjack scissor jacks?

asked by: Doug

0

Expert Reply:

The spacing between the mounting holes on the SnapPad SnapJack for RV Scissor Jack Stabilizers # SN65FR is approximately 1-7/8".

expert reply by: Kevin C

0

$\SN65FR$

\SN65FR
(click to enlarge)

Answer 1

The distance between the bolts on the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers #SN65FR is 2" on center which is the standard. If you want to use these with your scissor jacks the only option would be to replace the one with the…

view full answer...

Answer 2

Thanks for reaching out, Mark! The Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs #TJSCHD-24-4 are designed with 11 Gauge steel and install using 1/4" self-tapping screws like the Self-Tapping Screw #FA1131822. Then for base…

view full answer...

Answer 3

The SnapPad SnapJack for RV Scissor Jack Stabilizers #SN65FR are made available to us from the manufacturer in packs of 2. I do not know their reasoning, but that is likely why they are available from us the same way. That being said, it is still…

view full answer...

Answer 4

From what I was able to find online your 2010 Chevy Silverado with a 4.3 liter V6 engine has a towing capacity of 6,700 lbs. A weight distribution system like the Reese kit part #RP66560 that you referenced would be a great idea to help you tow at…

view full answer...

Answer 5

The #TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly for you.…

view full answer...

Answer 6

Yes, the SnapPad SnapJack part #SN65FR will work with the JT's Strong Arm Jack Stabilizer Kit #LC191025 for scissor jacks. SnapPad doesn't create any clearance issues with the StrongArm.

view full answer...

Answer 7

Hi Marty; to answer your question, the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers #SN65FR will work for your 9,200 lb trailer, yes. The specs aren't actually for the SnapPads themselves (which I know is a bit confusing). The #SN65FR will…

view full answer...

Answer 8

There is no difference between the 2,500 version of the SnapPad SnapJack for RV Scissor Jack Stabilizers, and the 5K to 7K version #SN65FR. The only difference between the two would be the capacity they can handle. In order to determine which one…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

SnapPad SnapJack Mounting Hole Spacing

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching