Replacement Circuit Board For a MaxxAir MaxxFan Deluxe Roof Vent 7500K

Question

Question:

I want a spare circuit board for my Maxxfan S/N: 2015-07-7500K-A00731. What circuit board would I need to purchase? Thank you.

asked by: Tom C

1

Helpful Expert Reply:

The Replacement Printed Circuit Board # MA10A21275K will fit your MaxxFan Deluxe Roof Vent # MA00-07500K. We also have the Fan Motor # MA10-20968, Lift Motor # MA10-20270 and Operator # MA10-20281K-1AF if you would also want to have these spare parts as well.

expert reply by: Bud M

1

Answer 1

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Answer 2

I spoke with the manufacturer and based on your issue the gears are most likely stripped out and can't sense that its reached the end so you'll need the Replacement Lift Motor for Maxx Fan Plus Roof Vent #MA10-20270. If this doesn't solve…

view full answer...

Answer 3

The MaxxFan Deluxe Roof Vent, #MA00-07500K probably has a faulty operator mechanism or lift motor. The correct replacement part number for Replacement Operator Mechanism for MaxxAir MaxxFan, is #MA10-20281K-1AF. The Replacement Lift Motor for Maxx…

view full answer...

Answer 4

I spoke with my contact at MaxxAir regarding the issue you are having with your Deluxe Roof Vent #MA00-07500K. He said the dome not automatically lifting when starting the fan might be related to the temperature you have the unit set at for…

view full answer...

Answer 5

I suggest pulling the 12 volt DC fuse and let it sit for 15-20 minutes to try and hard reset the 4900N MaxxFan Deluxe Roof Vent. You should check all the wires and connections for damage like corrosion, shorts or overheating. If this doesn't work…

view full answer...

Answer 6

Since the remote works we know the board isn't totally shot. I'm guessing it is the wiring for the control switch. All you can really do is check that wiring to make sure it is secure and no corrosion is present at both ends. If you decide to…

view full answer...

Answer 7

Yes, it does appear as if your MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat, #MA00-06200K has a control board issue. I suggest the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents, #MA10A21276K.

view full answer...

Answer 8

We do have the exact replacement circuit board you need for your MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat - Manual Lift #MA00-06200K, which is the following part: - Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents…

view full answer...

Answer 9

For your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke #MA00-07500K the remote screen can work and even other functions and yet not the fan could still be a remote issue. Here are things to test: Does…

view full answer...

Answer 10

I'll start off by saying that typically the flashing green lights on your MaxxFan #MA00-04000K means that there is some sort of voltage issue and even though when you tested you're getting what seems to be proper voltage, I would guess there…

view full answer...

Answer 11

This is more than likely a circuit board issue, and to alleviate the issue you'll just need to replace your unit's circuit board. If you have the MaxxFan Plus models: 00-04500K, 00-04700K, 00-04800K, and 00-04900K, or the MaxxFan Deluxe,…

view full answer...

Answer 12

I can confirm that the MaxxFan circuit board #MA10A21275K is the same as the 10C21275K that you mentioned as well. This has changed part numbers twice and what we offer is the current version.

view full answer...

Replacement Circuit Board For a MaxxAir MaxxFan Deluxe Roof Vent 7500K

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching