Question

Question:

I’m replacing an Atwood GC66A- 10E with a Dometic DMC 74FL. Just bought it from you. My question is do I need a new door kit as in the DMC24FR? If so do you have any in stock in black?

asked by: Tim W

0

Expert Reply:

For your application you would need to use the door adapter kit like the # DMC24FR that you referenced but the problem is that this specific door part number is not available so we had to take it off our site.

expert reply by: Jameson C

0

Answer 1

Hey Ed, Thanks for your question, and I'm sorry to hear you're having trouble with your water heater. While I can certainly recommend replacement options, I think it's worth identifying the root cause of the flame rollout first.…

view full answer...

Answer 2

Great question, Joseph! If you want to stick with something similar to what you already have you would want to go with part #DMC74FR. Make sure to measure the space your original water heater is in just to make sure this water heater will fit. This…

view full answer...

Answer 3

To install the Dometic water heater part #DMC74FR in place of your current Dometic setup what you need is the adapter part #DMC24FR and you'd be set.

view full answer...

Answer 4

Hi Devon; all of the Atwood G6A models are 6 gallon water heaters with some slight variation within the models which is why you see the Dometic #DMC74FR (Gas/Electric) or #DMC39RR (Gas only) recommended as the replacement. The same is true for your…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Product Page this Question was Asked From

Continue Researching