Looking for 5th Wheel 7-Way Kit for Bed of 2023 Ford F-250 Towing RV

Question

Question:

I’m looking for a rv trailer plug kit to put a plug inside the bed of my 2023 F250. Can you help? Thanks

asked by: Jerry L

0

Expert Reply:

Hey Jerry, we have just what you are looking for with the Curt fifth wheel/gooseneck 7-way kit part # C57008. This will plug inline with the 7-way you have at the rear of your 2023 Ford F-250 and will give you enough wiring and an additional 7-way that you can mount up in the truck bed for when you are towing your RV like you are needing. You will need to drill a hole in your truck bed to install it but the install is very easy and straightforward. What RV are you towing and do you have any big plans?

expert reply by: Jameson C

0

Truck Bed 7-Way
(click to enlarge)

James

7/22/2026

They aren't joking. This plug adapter is the easiest way to go. Drilling the hole will be the hardest part of the complete install. Plenty of wire for the job. I highly recommend it.

Jameson C.

7/22/2026

@James that's great to hear thanks!

Steve

7/22/2026

I have bought 2 of these for my trucks. The first one I had no problems with. The second on was fine for a year then every time it rained or in the winter I would get error codes. The trailer is disconnected then it was connected then disconnected. It’s was so annoying I took it off my truck. I haven’t replaced it yet.

Jameson C.

7/22/2026

@Steve Did it seem like it was getting wet behind the connector?

Steve

7/22/2026

@JamesonC yes it kept getting wet so I greased it but nothing helped. I think it was a bad harness

Jameson C.

7/22/2026

@Steve Are you going to replace it with something similar or go with an exact replacement? Or do you think you'll replace it at all?

Joel

7/23/2026

This kit works perfectly, we have installed several for customers over the years

Expert Reply:

Hey Jerry, we have just what you are looking for with the Curt fifth wheel/gooseneck 7-way kit part # C57008. This will plug inline with the 7-way you have at the rear of your 2023 Ford F-250 and will give you enough wiring and an additional 7-way that you can mount up in the truck bed for when you are towing your RV like you are needing. You will need to drill a hole in your truck bed to install it but the install is very easy and straightforward. What RV are you towing and do you have any big plans?

expert reply by: Jameson C

0

Answer 1

The Lippert/Curt Turning Point pin box uses a unique bolt pattern of which we only carry the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR. This will allow you to tow your 2022 Forest River Rockwood Ultra Lite 2892RB. The Reese…

view full answer...

Answer 2

Hey Timothy, basically almost every hitch ASIDE from the Q series Curt hitches like the part #C16130 that you referenced can be used with the Curt Turning Point pin boxes. That's actually one of the reasons Curt updated that line of hitch with…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Looking for 5th Wheel 7-Way Kit for Bed of 2023 Ford F-250 Towing RV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching