Suspension Enhancement that Fits 2000 Chevy K2500 with In-Bed Hitch

Question

Question:

What is the correct air bags for 2000 Chevy K2500 with BW gooseneck hitch?

asked by: Burns

0

Expert Reply:

I have a solution but none of the air bag kits that fit your 2000 Chevy K2500 fit with in-bed hitches like a gooseneck. So instead you'd need to go with a jounce spring style kit like the Timbren part # TGMRCK25 which is compatible and would work great.

expert reply by: Jameson C

0

Answer 1

The Timbren kit part #TGMRCK25 that you referenced comes with two spacers which push the rubber spring further away from the bracket it is attached to which allows for it to engage at the proper time.

view full answer...

Answer 2

For your 1998 Chevy K2500 we have suspension enhancement that fit with an in-bed hitch like the Timbren part #TGMRCK25 but we do not have any air bag kits that fit your truck configuration.

view full answer...

Answer 3

The installation kit you will need for Bulldog gooseneck hitch 947533 and your 1990 Chevy 2500 pickup is #4440. The one you asked about, 4454, is designed for models newer that yours. But #4440 is the way to go for your truck. I have included a link…

view full answer...

Answer 4

Yes, I checked with Air Lift and the Air Lift LoadLifter 5000 Air Helper Springs part #AL57216 are listed as a fit for a 1994 Chevrolet C/K Series 1500 (All Cab/Bed Types).

view full answer...

Answer 5

Since gooseneck and 5th wheel hitch brackets need to match with the hitches themselves, even if your Atwood folding gooseneck hitch fit the Curt rails I couldn't recommend doing so because they have never been tested together. For a similar…

view full answer...

Answer 6

To install the Draw Tite Remov-A-Ball gooseneck hitch in the bed of your 2016 Chevy Silverado 2500 does require an install kit. We offer the kit with this hitch as part #6300-4456. Basically the install kit is a set of rails that attach to the truck…

view full answer...

Answer 7

I was able to go out to our warehouse and measure the Remov-A-Ball Gooseneck Hitch #6300 for you. From center to center the holes were 11-1/4 inches apart and 9 inches, I've attached an image that better shows which measurement is which for your…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Suspension Enhancement that Fits 2000 Chevy K2500 with In-Bed Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching