Replacement Hub/Drum For Dexter 8-271 With 5 Bolt Mounting Pattern
Updated 07/16/2025 | Published 06/12/2023
Products Featured in This Question
Question:
I have a wolverine pontoon boat trailer. I am looking for a drum Info on hub is: Dexter Dia 7.00 7J05, WF2, 8-271 5 lug 1 inch axel shaft I am needing the drum, bearings, seals and grease jet cap. Any help would be greatly appreciated Thank You
asked by: James V
Expert Reply:
We do have the Dexter Trailer Hub and Drum Assembly for Standard # 8-271-7UC3 or EZ Lube # 8-271-7UC3-EZ axles. These are the 8-271 hubs you have with the 5 on 4-1/2" bolt pattern. These fit on a 1-1/16" diameter BTR spindle. They include all the bearings, races, seal, lug nuts and grease cap.
If you only have a 1" BT8 spindle you will need the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-2-EZ-1K. The easiest way to verify is by removing the hub castle nut and checking the part number on the outer bearing. A 1" spindle uses a Bearing # L44643 while a 1-1/6" spindle uses a Bearing # L44649.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44643 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Search Results: 8~257
- Search Results: 7 inch brake drums
- Search Results: 8~257~5uc3~ez
- Search Results: 023~047~00
- Search Results: l track
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Q&A: Is Dexter Hub and Drum Assembly 8-257 Available
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb E-Z Lube Axles - 5 on 4-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Hubs/Bearings for 2000 Kendon Folding Trailer With 1-1/16 Inch Diameter Spindle
- Q&A: Availability Of 7" Hub/Drum With L68149 / L44649 Bearings And 5 on 4-1/2" Bolt Pattern
- Q&A: How Far Down are Mounting Holes of Fulton Coupler
- Q&A: Wiring a Trailer Breakaway Switch on a Trailer with an Existing Winch Battery
- Q&A: How to Determine Between 5 on 4-1/2 and 5 on 5 Bolt Patterns for Hub Covers
- Q&A: Parts Needed To Add Electric Drum Brakes To Boat Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: What are the Common Types of Propane Fittings Used on RVs?
William S.
7/15/2025
I have a straight axle 6" long and 1 1/16 OD. this is not not a easy lube. I don't know if its a 2000 2500 lbs