Replacement Bearing Kit, Hub/Drum and Brake Assemblies For a 2010 Aliner Classic Camper
Updated 06/06/2023 | Published 06/04/2023
Products Featured in This Question
Question:
I need wheel bearing kit for a 2010 Aliner Classic with off-road package [14 inch wheels, 10 electric brake and I believe 3000lb axle]. I think it would be your BK2-100 kit. If you could confirm I would much appreciate it.
asked by: Matt W
0
Expert Reply:
Yes. the Bearing Kit # BK2-100 is the correct kit for the 3,000lb axle under your 2010 Aliner Classic. If you determine your Hub/Drum # AKHD-545-35-K is worn we do have these you can replace. We also have the Left # AKEBRK-35L and Right # AKEBRK-35R brake assemblies if they also need replaced.
expert reply by:
Bud M
0
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Bearing and Seal Kit for Lippert 4.4k Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Bearing Kit for a 2022 Grand Design Transcend Xplor 265BH
- Q&A: Replacement Bearings, Races, Grease Seals & Brakes For Lippert 4,400LB Axle On Jayco Travel Trailer
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes