Replacement 5 Amp/Hour Breakaway Battery For FM1250 5.0AH

Question

Question:

The backup battery on my trailer says FM1250 12v 5.0ah/20hr. Will any 12v backup battery work or do I need something specific? Thanks in advance

asked by: Chris P

0

Expert Reply:

You will want to replace your backup battery with another 1250 5 amp/hr battery. This will ensure you get the correct size to fit inside your battery case. We currently have the 3 options.

Hopkins # HM20008
Curt # C52023
Bright Way # 3801250

expert reply by: Bud M

0

Answer 1

Lithium batteries require a higher charging voltage than standard batteries which a 12 volt trailer accessory source would not be able to provide. So while a lithium battery would do a great job it wouldn't be able to be charged when towing so a…

view full answer...

Answer 2

The best way to keep a breakaway battery charged while not in use is to use the Solar Battery Charger part #PTW2997. The Solar Battery Charger is perfect for the situation you described as the trailer will be outside and you don't have to worry…

view full answer...

Answer 3

Both the CTEK US 0.8 Universal Battery Charger with Pulse Maintenance part #CTEK56865 and the Bright Way Solar Battery Charger and Maintainer part #BRW54FR would work well for this application. I prefer the solar option as it wouldn't require…

view full answer...

Answer 4

Hey Roger, I was able to pull up the dimensions of the battery you have now and found that the Bright Way replacement battery part #3801250 is exact same dimensions and is also a 5 amp hour battery so it would work great for you.

view full answer...

Answer 5

Hi Ron! To get the 12v power port on your 7-Way working, you will want 12 gauge wire and a 40 amp circuit breaker (I have both listed below). This will get you needed power and protection for your Curt Echo Wireless Brake Controller #C51180. 12 Gauge…

view full answer...

Answer 6

Hey Dakota, the Fulton Square Drop Leg for Stabilizer Jack #FSJ40324 that you referenced is rated individually at 3,000 lbs. So if you were using two it would have a capacity of 6k but you would also need the outer tube part #FSJ10300 as well to…

view full answer...

Answer 7

While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…

view full answer...

Answer 8

Hey Jeff, we can definitely help but the pins that go into the breakaway switch are not all universal and unless you know what brand it is the best solution is to just replace the entire switch like with the part #420000 as this approach is universal…

view full answer...

Answer 9

The grease seal you need is the part #13194 which has an inner diameter of 1.372 inch and an outer diameter of 1.983 inch.

view full answer...

Answer 10

I recommend replacing your axle with one that is more universally compatible. This will help you in the future with sourcing replacement parts when they need replaced. With the bearing sizes on your tapered spindle we do not have a replacement hub.…

view full answer...

Replacement 5 Amp/Hour Breakaway Battery For FM1250 5.0AH

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching