Arrives before Christmas 
Radial tire has a ply rating of 6 and a 1,820-lb maximum load at 50 psi. The 15" diameter x 5" wide steel trailer wheel has a 5 on 4-1/2 bolt pattern and a corrosion resistant, black powder coat finish.
Features:
Specs:
This tire has a 1-year worry-free guarantee. If within the first 12 months the tire is damaged in any way, it will be replaced at no charge.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Kenda Karrier KR53 ST205/75R15 radial trailer tire. It's in a load range C. And it's mounted on this 15 inch black modular steel trailer wheel with the 5 on 4-1/2 inch bolt pattern. Now, this tire and wheel assembly is ideal for stock trailers, utility trailers, and even campers. This is the new Kenda Karrier KR53 special trailer radial tire.
It's a low weight tire, provides better fuel economy for long trips, and it is an ST tire, which stands for Special Trailer tire, has the sturdy sidewall so they can handle heavy loads and it is created specifically for trailers. It's not intended for use for other vehicles. The sidewalls are basically engineered for enhanced durability and resistance to ozone exposure. The tread on it is a computer-generated tread design and it uses premium rubber compound materials, gives you superior traction in wet or dry conditions. And the tire size on this, if we go to the sidewall, you'll be able to see it's listed ST for Special Trailer 205/75R15.
The R means that this is a radial tire. Section width on this is 7.8 inches. Overall diameter from the bottom to the top when it's inflated is 27.1 inches. We mentioned it's a load range C, which means it's a six ply rated at tire. It does have a maximum load capacity of 1,820 pounds at 50 PSI.
And it does come with a speed rating stamped on it. And I do wanna show you where that's located. Right after the tire size, you'll see two numbers for the load index, then you'll see the letter N. They stamp the speed rating with a letter designation and the speed rating N is a 87 mile per hour speed rating. The wheel is a modular design by Dexstar.
It's a sturdy steel construction. And when we say modular design, it's the one that has the round holes all the way around the wheel. This'll give you excellent corrosion resistance 'cause they use a two-step finishing process on the wheel, which will include first an e-coat primer and then a black powder coat finish over the whole wheel. It is a high quality wheel, meets the DOT Department of Transportation specifications. Now, if you notice, the center cap is not included. If you do want one, we do sell those separately on our website. You do wanna make sure to get one that'll have the same diameter as this pilot hole 'cause when you install your center cap, it does go through that hole. The diameter of this pilot hole is 3.19 inches. Now, the wheel itself, the diameter is 15 inches. The width on just the wheel is five inches wide. This wheel has a bolt pattern of 5 on 4-1/2 inches. And if you wanna measure that on a wheel that's a five lug or an odd number of lugs, it's pretty easy. All you have to do is pick one of the holes, let's say this one, and then you're gonna measure across to either one of these holes. And when you measure, it's from the center of the starting hole to the furthest edge of the hole that you measure to. So on this one, if we measured, it'd be 4-1/2 inches. So it's a five lug, 4-1/2 inch bolt pattern. Does use a wheel lug size 1/2 by 20, and the weight capacity on just the wheel is 2,200 pounds. Now, this tire and wheel assembly will meet the DOT Department of Transportation specifications. But that's gonna do it for a look at this Kenda Karrier KR53 ST205/75R15 radial trailer tire in a load range C on this 15 inch black modular steel trailer wheel.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.