Replacement Master Cylinder for a UFP A-60/A-75 Surge Brake Actuator

Question

Question:

Need Master Cylinder for trailer with model # UFP 60/A-75. Please confirm the correct replacement. Also, want OEM, not aftermarket crap.

asked by: Geoff S

0

Expert Reply:

We do have Dexter brand master cylinder replacements for the model # UFP 60/A-75 brake actuators. I have listed both options below depending on what type of brakes you have:

Drum Brakes - Replacement Master Cylinder Assembly for Dexter Brake Actuators item # TK71-756-00

Disc Brakes - Replacement Master Cylinder Assembly for Dexter Brake Actuators item # DX44FR

expert reply by: Jerred H

0

Answer 1

The Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes #DX44FR can be used to replace the A-60 master cylinder and is designed to fit on a variety of Dexter/UFP brake actuators.

view full answer...

Answer 2

We do have a potential solution for you. Unfortunately, the swing away actuators like the one on your 2005 Mastercraft trailer have been discontinued, so I am afraid there is no direct replacement, or anything that will fit inside the current swing…

view full answer...

Answer 3

We have exactly what you're needing with the Dexter Trailer Hub and Drum Assembly for 3,000-lb E-Z Lube Axles #DX62KR. This is the same exact hub and drum assembly that you have - we just use a different part number. The pricing can be found on…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 9

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Replacement Master Cylinder for a UFP A-60/A-75 Surge Brake Actuator

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching