Comparing Dutton-Lainson StrongArm Electric Winch to Fulton XLT 10

Question

Question:

How does the DL25215 compare to the Fulton 10 XLT I currently have?

asked by: Glenn D

0

Expert Reply:

The Dutton-Lainson StrongArm Electric Winch # DL25215 is comparable to your Fulton XLT 10, but there are a few differences. The main difference is the capacity. This winch is designed for boats up to 9,000 lbs vs the 10,000 lb capacity of the Fulton.

It has the same power in, power out, and free spool. It also features a dynamic motor brake, heat-treated gears, and precision needle bearings. The only other thing it is lacking is a remote. You will have to operate StrongArm using the switch on the winch itself. However, it is possible to add a remote with the # DL24054 if you really need one.

expert reply by: Robin H

0

Answer 1

The type of battery you are looking for to use with the Dutton-Lainson StrongArm Electric Trailer Winch #TW4015 is just going to be a 12 volt battery rated for a minimum of 40 amps, and this is going to be a standard vehicle battery. There are so…

view full answer...

Answer 2

The Superwinch gets wired to an ignition switch, so it isn't something that is meant for a boat trailer. The fastest 12 volt electric winch that can be powered with a 12 volt battery with a boat trailer is the Dutton-Lainson StrongArm 12-Volt DC…

view full answer...

Answer 3

Yes, the correct remote and wiring harness for the Dutton-Lainson StrongArm Electric Winch part #DL25215 is the Dutton-Lainson Remote Hand-Held Switch for DC StrongArm SA Series Electric Winches part #DL24054. The Dutton-Lainson remote is compatible…

view full answer...

Answer 4

For as trashed as those brake assemblies are I am impressed with how spotless that spindle is! Based on the bearing numbers you mentioned you have a #84 spindle and the hub part #AKHD-545-35-G-K is correct. Since this its galvanized it's a really…

view full answer...

Answer 5

The closest option we have to replace your Atwood 82543 actuator is part #DM72VR. However, it doesn't have the lockout like your Atwood does. To add a lockout use #T4748800 but it's an electric lockout unlike the Atwood's manual lockout.…

view full answer...

Answer 6

You will need to replace your Atwood 82543 with one like the Demco Hydraulic Brake Actuator #DM72VR. Your Atwood is obsolete along with the replacement parts for it. This actuator is rated for trailers up to 7,000lbs which is slightly higher than the…

view full answer...

Answer 7

The Demco Hydraulic Brake Actuator part #DM72VR is a great option to replace an Atwood 82543. That said, it does not come with any sort of reverse lockout feature therefore in order to reverse without the brakes locking up you will either need to add…

view full answer...

Answer 8

I do have some great replacement options for you but I don't know what this trailer comes with from the factory so the best option we can offer without knowing this is the Fulton Bolt-Thru Swivel Marine Jack part #FXP10 which features a simple…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Comparing Dutton-Lainson StrongArm Electric Winch to Fulton XLT 10

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching