What is the Difference Between the Dexter E-Z Flex Equalizers # K71-653-00 & # K71-655-00

Question

Question:

What is the difference between K71-653-00 and K71-655-00?

asked by: Mike O

0

Expert Reply:

The difference between the # K71-653-00 and the # K71-655-00 is that one is a kit and one is just the equalizers.

The Dexter E-Z Flex Suspension Kit # K71-653-00 includes the equalizers, shackles, nuts and bolts.

While the E-Z Flex Equalizers # K71-655-00 only includes the equalizers and mounting bolts with locknuts.

expert reply by: Scott S

0

Answer 1

The Dometic DOTR12CB is no longer made, but there is a very similar option that will work perfectly in its place, from Furrion: - Furrion Standard RV Microwave #FMSN09BL This is a 900 watt microwave that measures 19-1/16" wide x 13-5/8"…

view full answer...

Answer 2

The closest compatible option for your Dometic DOTR12CB RV microwave's size is the Furrion Standard RV Microwave #FMSN09BL. It measures 19-1/16" W x 13-5/8" H x 15-7/8" D with a 0.9 cu ft capacity.

view full answer...

Answer 3

The 94720 Reese Goose Box is a fit for 1621, 1621HD, and 0719 bolt patterns so you most likely have a 1621 bolt pattern. That being said, it's still best to measure to confirm the pattern. I've attached a link below that will walk you through…

view full answer...

Answer 4

The SoftStartRV Soft Start for RV AC Units, #SSR54FR, is close to a one size fits all item, it is designed to be as universal fit as possible. This can be used on most any typical AC currently being installed by RV OEM's and it can be used with…

view full answer...

Answer 5

From the center of the first set of bolt holes to center of the king pin on the Trailair Air Ride 5th Wheel King Pin #UF35-946215 is approximately 14". I do want to note that the #UF35-946215 only fits the Fabex 730 and RBW 7019 bolt patterns.…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

What is the Difference Between the Dexter E-Z Flex Equalizers # K71-653-00 & # K71-655-00

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching