Is There Replacement Hardware for a B&W Turnover Ball Gooseneck Hitch GNRK1313 2012 Ram 2500

Question

Question:

I’m looking for a hardware kit for a bw turnover ball model 1313. I’m looking for all the bolts and u bolts etc.

asked by: Cody M

0

Expert Reply:

The B&W Turnoverball Gooseneck Custom Installation Kit # BWGNRM1313 contains the mounting hardware and brackets for the Hitch # BWGNRK1313. It does not contain the Center Section # BWGNRC900 or Safety Chain U-Bolts # BW1900-2-1600. This is the only way we carry the hardware for your hitch.

expert reply by: Bud M

0

Answer 1

Shane, sorry to say we don't have a replacement hardware kit by itself for the B&W Turnoverball #BWGNRK1313. The hardware actually does not look like it's offered by B&W themselves, unfortunately. What I did instead is attach a…

view full answer...

Answer 2

We don't carry just a hardware kit for the bolts of a B and W gooseneck hitch part #BWGNRK1313. Your best option would be to take the following list of bolts to your local hardware store so that you can piece together everything you'd need.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Is There Replacement Hardware for a B&W Turnover Ball Gooseneck Hitch GNRK1313 2012 Ram 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching