Replacement Trim for 7/8 inch Wide Track of RV

Question

Question:

Im looking at this product to replace the screw track weatherstripping on one side of my 5th wheel. I measured the total width of my screw track outside edges to be 7/8. Did I measure correctly? Is this the right product for my screw track?

asked by: Robert D

0

Expert Reply:

Yes, based on the width of your screw track being 7/8 inch the correct replacement weatherstripping would be the part # SR78FR.

expert reply by: Jameson C

0

Answer 1

The Rubber Trim for Vehicle Trim Molding, #SR78FR is 7/8" as shown in the attached and identified as fitting 3/4" tracks as measured on the inside, such as your measurement is taken.

view full answer...

Answer 2

Thanks for reaching out, Wade. We offer a wide variety of trim molding for RVs and campers, so we certainly should have an option for you. There is no way for me to look up your camper to know exactly what kind of trim you will need. The best way to…

view full answer...

Answer 3

Thank you for the pictures, you're just needing the trim inserts. You'll just need to measure the space available for the trim insert to find the correct size. We carry 3/4" #CAM25262 and 1" #CAM25202 widths.

view full answer...

Answer 4

Hey Tracey, yes the CIPA universal tow mirrors part #CM11980-2 are a fit for your 2023 Chevy Silverado 1500 and would work great. That said we also have the Longview custom tow mirrors part #LO54FR that are a custom fit for your truck and actually…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Replacement Trim for 7/8 inch Wide Track of RV

Product Page this Question was Asked From

Continue Researching