Is There an Install Video for the Malone EcoLight Sport Trailer

Question

Question:

I bought a kayak trailer and was wondering if there is an installation video. Its a small lightweight 3 kayayak

asked by: Rod S

0

Expert Reply:

Yes, we do have an install video for the Malone EcoLight Sport Trailer like part # MAL63FR. I have attached this for you below.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Steve, it looks like you are comparing the Malone EcoLight Sport Trailer with J-Carriers part #MAL93FR with the Yakima LowRider Kayak Trailer #Y82QD. The Malone actually has a 400 lb weight capacity vs. the Yakima which is rated for 750. The…

view full answer...

Answer 4

Hello Josh. Yes, you can install a cargo box on the crossbars of the Yakima LowRider Kayak Trailer #Y82QD. The LowRider crossbars are the Yakima HD Crossbars part #Y01159, which are 78" long, 3" wide and 1-1/2" tall. These will be…

view full answer...

Answer 5

Hey Larry! With the exception of their USA made cargo boxes, everything from Yakima is manufactured in China or Taiwan. They wouldn't give me the specifics for the Yakima LowRider Kayak Trailer #Y82QD or #Y82KD so all I can say is it comes from…

view full answer...

Answer 6

Hello Jack, thanks for reaching out. The Yakima LowRider Kayak Trailer is a great option for carrying tow Old Town sportsman 106 kayaks. The crossbars are 78" long so you will have room to spare with the kayaks side by side. Also, the tires have…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Is There an Install Video for the Malone EcoLight Sport Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching