Measurements For Mounting Bolt Holes On Torflex Lift Kit # K71-707-02

Question

Question:

Can anyone tell me the distance, from center to center, for both sets of bolt holes? Are they 5/8inch holes? Do the holes on the adjacent angles live up exactly form centers? Also, the bolts holes on the side that attaches to the frame, these are not centered, correct? How off - center are they?

asked by: Harold R

0

Expert Reply:

The holes on the Torflex Lift Kit # K71-707-02 are spaced 8" on center for the side holes and the bottom holes. These holes are slightly larger than 5/8" as they use 5/8" mounting hardware. The side mounting holes are offset approximately 3/8" off center to fit the Dexter Torflex #10 Axle Side-Mount Frame Mounts # DX54FR

expert reply by: Bud M

0

Mounting Bolt Home Separation
(click to enlarge)

Answer 1

Hi Nick, unfortunately we don't have anything with bolt holes that are 9-3/4" apart on center, just 9-1/2" apart, so you may want to measure to get as exact as possible. Also, does your axle have a number on it, either 10 or 11, just…

view full answer...

Answer 2

For your horse trailer with Dexter Torflex 3500 lb axles, you will need the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift #K71-707-02 along with two sets of the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit #DX54FR which…

view full answer...

Answer 3

Yes, the Torflex Lift Kit #K71-724-02 is compatible with your #11 Torflex axle. The note about the 3" high profile bracket is corresponding to the brackets on the axle and not the Trailer Hanger #DX57FR. Your brackets appear to be 3-3/4"…

view full answer...

Answer 4

Thanks so much for the photo that was super helpful, and what the axle tag shows is that you have a #11 Dexter Torflex axle. We do have the correct lift kit for you, which is the following part: - Torflex Lift Kit - Tandem Axle #K71-724-02 This kit…

view full answer...

Answer 5

I sent your axle info to Dexter and they were able to determine that you have a set of 7k Dexter Torflex axles so the correct lift you need is the part #K71-725-02 which will give you a lift of 3-1/8 inches.

view full answer...

Answer 6

Based on your information, it sounds like you have #11 Torflex axles. If this is correct then I recommend the Torflex Lift Kit, Item #K71-724-02, that works with #11 Torflex axles with 4,100-lb to 6,000-lb capacities. If you have round axles then…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Measurements For Mounting Bolt Holes On Torflex Lift Kit # K71-707-02

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching