Does Install of Aries AdvantEdge Bull Bar AA89FB Require Removing Tow Hooks

Question

Question:

Is the vehicle able to keep the factory tow hooks with this application?

asked by: Clay

1

Helpful Expert Reply:

The install of the Aries AdvantEdge Bull Bar # AA89FB does require removing the factory tow hooks.

expert reply by: Jameson C

1

Answer 1

The BulletProof Hitches Adjustable Mud Flap System for 2", 2-1/2", and 3" Hitches #BPH36VR requires 1" of space on the ball mount between the hitch receiver and the upright of the ball mount platform.

view full answer...

Answer 2

For your 2021 Chevy Silverado 3500 with 235/80R17 dual tires, the best option for tire chains that fit are from Titan: - Titan Chain Snow Tire Chains w/ Cams for Dual Tires - Ladder Pattern - V-Bar Link #TC4821CAM There are a few reasons I really…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 9

Hey Larry! Yes, the Onan Generator - QG 7000i Onboard RV Generator #CM44MR is capable of using a remote start. For a standard setup, you can use a switch like #CM86RR along with an extension harness #CM26RR. You can also use the EC-AGS+ Auto…

view full answer...

Answer 10

Hey Lauris! Is the Brinkley prepped for a generator or are you saying it has room for one? If it doesn't have some kind of generator prep you're going to need a lot of parts from Cummins to install #CM44MR. You will have to add a fuel tank,…

view full answer...

Answer 11

Hey John, this is a great question. I asked B and W about whether or not the B and W Fifth Wheel to Gooseneck adapter part #BW73RV would void the frame warranty and they said it has been extensively tested and engineered to provide a smooth, stable…

view full answer...

Answer 12

Hey Adam! All you need to use the Andersen Aluminum Ultimate 5th Wheel Connection 2 Gooseneck #3220 is a gooseneck hitch. The best option is going to be the B&W Turnoverball #BWGNRK1020. The Turnoverball allows the ball to be stored upside down…

view full answer...

Does Install of Aries AdvantEdge Bull Bar AA89FB Require Removing Tow Hooks

Continue Researching