Does Westin E-Series Round Nerf Bars 23-0500 for a 1998 GMC C/K Series Pickup Come with Two Bars

Question

Question:

is this a set of 2 bars for 234.00 or each. are they 3inch x 4

asked by: Bob D

0

Expert Reply:

The Westin E-Series Round Nerf Bars part # 23-0500 which is a fit for a 1998 GMC C/K Series Pickup is a complete kit, it comes with both nerf bars and the mounting brackets/hardware needed for installation. The nerf bars are 3" wide.

expert reply by: Conner L

0

Answer 1

From the center of the tube to the center of the tube for the Westin E-Series Round Nerf Bars #23-0500 is measures 48" but then the overall length is 51". Please note that this is designed to fit various models of Yukon, Tahoe, Blazer, and…

view full answer...

Answer 2

The Westin E-Series Round Nerf Bars #23-0500 for a 1988-2000 Chevy/GMC C/K install on the frame/body mount. You will actually remove the body mount bolts, then per the instructions, "attach the Bracket to the body mount."

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Does Westin E-Series Round Nerf Bars 23-0500 for a 1998 GMC C/K Series Pickup Come with Two Bars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching