Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
1996 Chrysler Concorde
Westin
Westin E-Series Round Nerf Bars - 3" - Polished Stainless Steel
Part Number: 23-0500
In Stock
$242.75
1996 Chrysler Concorde
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (261)
- Q & A (0)
- Photos
Westin Nerf Bars - Running Boards - 23-0500
- Nerf Bars
- Silver
- Cab Length
- 3 Inch Wide
- Stainless Steel
- Fixed Step
- Westin
- Polished Finish
- Round
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Features:
- Custom-fit, economically priced, round nerf bars make it easy to get into and out of your vehicle
- Curved ends of step bars give a finished, street-style look
- Non-slip step pads sit in recessed tube areas instead of cutouts
- No holes in tubing means maximum strength and durability with no internal corrosion
- Sturdy polymer plastic construction resists UV rays, fading, and cracking
- 304 Stainless steel tubing with polished finish is long-lasting and rustproof
- Quick and easy bolt-on installation
- No drilling required
- Powder coated mild steel brackets and hardware included
Specs:
- Tubing diameter: 3"
- Step pad width: 3"
- Step pad quantity: 1 per bar
- Quantity: 2 nerf bars
- Lifetime warranty
The step pad areas in Westin's E-Series round nerf bars are indented instead of cut out, maintaining the structural integrity of the stainless steel tubing and preventing internal corrosion.
As shown in the image above, these step bars have a U-style tubing, which ensures that each bar conforms perfectly to your vehicle. Installation is quick and simple - just bolt the mounting brackets to existing holes in your truck's frame. No drilling is required.
23-0500 Westin Stainless Steel Round Tube Steps with Steel Brackets - E Series - Polished - 3" Wide
Installation Details
This Product Fits The Following Vehicles
- 1992 - 1994 Chevrolet Blazer Full Size - 2-Door
- 1988 - 2000 Chevrolet C/K Series Pickup Regular Cab
- 1988 - 2000 GMC C/K Series Pickup Regular Cab
- 1995 - 1999 Chevrolet Tahoe 2-Door
- 1992 - 1994 GMC Yukon
- 1995 - 1999 GMC Yukon 2-Door
Customer Satisfaction Score:
81% were satisfied with this product
19% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.8
261 reviews
by:
Glenn
10/17/2026
Bought this product for a friend for his birthday! He loves it on his truck!
by:
Gayle
03/23/2026
Just like you promised. Easy install
by:
Dennis
07/24/2025
1994
Chevrolet
Blazer
well I just received my package today so i have not had time to install it yet.
But, I will tell you that the packaging that came was perfect condition and after opening it to inspect it everything was as it should be.
Packaging was perfect and all parts look to be in good condition.
Have not installed it yet so can't say about installation.
Product looks very good.
But, I will tell you that the packaging that came was perfect condition and after opening it to inspect it everything was as it should be.
Packaging was perfect and all parts look to be in good condition.
Have not installed it yet so can't say about installation.
Product looks very good.
by:
Daniel
02/10/2025
1994
Chevrolet
C/K Series Pickup
Glad to have purchased from etrailer. The products are of high quality, their shipping was fast, customer service was right on point. I will continue to purchase from etrailer.
by:
Bob
04/20/2023
1998
GMC
C/K Series Pickup
you guys are great.answered my question quickly.thanks for your help and I would recamend etrailer for your needs.
Bob
4/21/2024
still like new
by:
Dennis
02/08/2024
Great service and everything went smoothly attaching the running boards to truck. You won't go wrong dealing with etrailer.
by:
EEE
12/07/2022
1994
Ram
2500
etrailer provides excellent products and service. Customer service verified that the 3” nerf bar side steps were a perfect fit for my Chevy 2500. They shipped very quickly and was easy to install wit accompanying instructions, and the price was good as well.
by:
Ronald
03/15/2020
The product shipped quickly and customer support was great. Upon opening, everything was packed neatly and in good shape. It took about an hour to install both, and they bolted up exactly as expected. They look great!
by:
Terry
04/20/2021
I have searched for these for a couple of years and finally found them on your site. After I got the old ones off the new ones were back on in minutes. They were exactly what I was looking for.
by:
Robert
04/04/2023
good job
by:
Kevin
01/06/2025
1994
GMC
Yukon
by:
Alan
06/21/2025
1974
Ford
F-100, F-150, F-250, F-350
by:
Marcus
09/04/2021
by:
Kelly
06/09/2022
by:
Benny
10/03/2023
by:
Heidi
04/02/2025
dodge
Ram Pickup
These replaced a powdered coated pair of Nerf Bars that we had gotten new with the truck. After 7 years and that many winters where mag chloride is used on the roads, the originals were pretty much a hunk of rust. These stainless steel ones look sharp on our RAM 2500. And I’m sure they will do the job as the first pair did.
Heidi
4/3/2026
So far so good. A years worth of use in heat, snow, rain, mud slush, gravel and paved roads. Still looking and performing well.
by:
Scott
11/18/2025
A quality set of nerf bars at a reasonable price. Installation was simple as well. Customer service during the ordering, delivery and follow up is second to none. The nerf bars helped bring an old truck back to life with some shine!
Mike L.
12/9/2025
Nice truck, Scott! Well done!
by:
Larry
06/30/2025
2003
Chevrolet
Silverado
Nerf bars came quickly. They were packaged well and secured in the box. All the items were marked for side and location. They did look good and welds looked good.
Larry
7/1/2026
I like them and they still look great on my Chevrolet Silverado LS HD 4x4 6L.
by:
JT
12/24/2025
They look nice, but two of the coupling nuts stripped and the instructions called for 1.75” bolts which the ones included were 1.0”. Luckily Home Depot had replacement couplings and bolts, so in the end got them installed. Beware if you are installing on an OBS Ford. Other than that, looks great.
by:
Jon
07/14/2026
2011
Ford
Ranger
Well, it seems that the directions included are: 1. Missing a page or two; offer virtually no help in installing because what photos are included are poor B&W, 2.There are no videos on your site nor the Westin site that show how to install these ON MY TRUCK, 3. Using some videos I found online posted by customers who care enough to help I installed them; however, the bars hang too low at the rear (not parallel with the body, front to rear), making the bars look terrible. All the pieces were there and were in very good condition. I will need to modify the installation with spacers, maybe a better-positioned hole or two. Good customer satisfaction depends upon the product and the instructions and tips. The product seems good. The customer satisfaction via the directions/tips is awful.
by:
David
01/31/2025
The rear mounting rail bracket for this product unfortunately aligns with a dip in the Bronco frame rail due to the Bronco's shorter wheelbase (front to rear). I was able to drive the bracket on with a big hammer and we'll see if it stays where put over time. For the Bronco's, if you made thee rear swing bracket 2 inches longer, the mounting bracket would then land in level part of the frame as it does with the F-150. I could not mount the rear bracket further back due to the leaf spring mount being in the way.
Brooke M.
2/24/2025
Hey, David! I showed some techs here the photos you sent and they were wondering if I could request a few photos from the outside of the truck vs. underneath, just to have some more perspective on the frame and placement.
by:
Ray
07/03/2026
2009
Ford
F-150
Fixing up the 2009 F150 regular cab that had Westin Nerf Steps from the factory. We gave it to our granddaughter for her 16th birthday. Somewhere over the years she had hit a pylon at a service station Badly damaging the step. Everywhere I looked showed it to be discontinued. Came across the etrailer site showing it. Called to confirm the fitment, Sara from customer service went out of her way calling Westin confirmed it was discontioned but asked if they might have some stock. They did received it in 2 days.
by:
Kevin
06/18/2026
Just replaced my old Westin nerf bars with these new ones! My old ones was 30 years old. These new ones should out last my truck!! Bolted right on. Look good! Very sturdy. Good price very fast shipping!!! Only problem I had to rethread nut in tube. Threads was messed up but I got it fixed. All good!!
by:
Dave H
10/17/2019
Had Westin step rails (nerf bars) on an old Ranger and got them for my new F150. This time I needed them to be able to get up into the rig (full-size pickups have gotten a lot bigger and taller in the past few years!). They installed easily, look good, and gave me the step I needed. I am as pleased with the latest step rails I got as I was with the old ones (which are now 21 years old and still functional … but not as pretty).
Dave H.
10/19/2020
Still doing the job and looking good!
25
261
true
Show More Reviews
See what our Experts say about this Westin Nerf Bars - Running Boards
- Replacement Westin Hardware For Step Bars 23-0500Yes, what you need is the part # 23-050pk. This is the replacement hardware for the # 23-0500 bars you have that will fit your 1992 GMC truck.
view full answer... - Black Westin Nerf Bars For A 1997 Chevy K1500 SilveradoHi Mike! We do have the 3" Westin nerf bars in black with the E-Series Round Nerf Bars - 3" - Black Powder Coated Steel # 23-0505. Not sure why they weren't showing up for you. Though they aren't shown on our page, the install brackets and hardware are also included. What size cab do you have on your 97 Chevy K1500? These ones are specifically for the regular cab, so figured I should ask.
view full answer... - Availability of Westin E-Series Round Nerf Bars for 1996 Chevy C/K Series With Extended CabHi Michael; the Westin E-Series Round Nerf Bars like the # 23-0500 you looked at are only available for the standard cab. If you have the 2-door model of the extended cab you can use the # 25-0635 which are similar and available in black. If you're fine with a different brand we also have the Aries Round Nerf Bars - 3" Diameter - Polished Stainless Steel # AA204001-2. These fit the 2-door and 3-door extended cab.
view full answer... - What is the Length of the Westin E-Series Round Nerf Bars # 23-0500From the center of the tube to the center of the tube for the Westin E-Series Round Nerf Bars # 23-0500 is measures 48" but then the overall length is 51". Please note that this is designed to fit various models of Yukon, Tahoe, Blazer, and GM pickups from 1988 - 2000 so if you don't have one of these we'll need to find you some different nerf bars.
view full answer...
- Replacement Mounting Brackets for Westin Nerf Bars on 2006 Dodge Quad Cab TruckSince the nerf bars are designed to fit specific vehicles, you'll need a specific mounting kit for the bars more than one for the vehicle. The good news is that the 2004 and 2006 Dodge Ram Quad Cab both used the same bars. If you have the Westin Nerf Bars # 23-0500 or # 23-0505 you can use the Replacement Mounting Brackets # 23-050PK , but it doesn't appear that those are the correct bars to fit either of those trucks. Instead, the correct Westin nerf bars that are designed to fit the...
view full answer... - How do Westin E-Series Round Nerf Bars 23-0500 Install on 1988-2000 Chevy/GMC C/KThe Westin E-Series Round Nerf Bars # 23-0500 for a 1988-2000 Chevy/GMC C/K install on the frame/body mount. You will actually remove the body mount bolts, then per the instructions, "attach the Bracket to the body mount."
view full answer... - Does Westin E-Series Round Nerf Bars 23-0500 for a 1998 GMC C/K Series Pickup Come with Two BarsThe Westin E-Series Round Nerf Bars part # 23-0500 which is a fit for a 1998 GMC C/K Series Pickup is a complete kit, it comes with both nerf bars and the mounting brackets/hardware needed for installation. The nerf bars are 3" wide.
view full answer... - Running Boards/Nerf Bars Fit on 1998 Chevy K2500 Regular CabThere are some nerf bars that fit your 1998 Chevy K2500 regular cab, but I checked with each manufacturer individually and there are no running boards - which are up closer to the frame of the vehicle - whatsoever for the regular cab, and only cab-length nerf bars exist. Nerf bars are similar but there is a bit of a gap between the truck and the step. So you can get some help with a step up into your truck if you're okay with that. The correct fits for your truck are from Westin: - Polished...
view full answer... - Westin Stainless Steel Nerf Bars to Fit 1995 GMC Regular Cab PickupThe 3 inch stainless steel Westin Ner Bars # 23-0500 are confirmed to fit your 1995 GMC truck. They run the length of the cab and have a 3 inch step pad on each bar.
view full answer...
Do you have a question about this Nerf Bars - Running Board?
Info for this part was:
Expert Research:
Jameson C
Video by:
Kathleen M
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Jessie B
Updated by:
Isabelle B
Installed by:
Robert C
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
George
7/16/2021
After a year my Westin step bars are still shining & getting lots of looks…love them!