Recommended 24 Inch Hitch Extender for a 3 Inch Receiver

Published 03/26/2023

Products Featured in This Question

Curt Solid Steel 3" Hitch Bar with Raw Finish - 18" Long

(173)

$82.62

Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long

(200)

$243.33

Curt Hitch Receiver Reducer Sleeve - 3" to 2-1/2"

(603)

$30.02

TorkLift Wiring Harness Extension for 24" SuperTruss Hitch Extender - 7-Way RV

(41)

$111.33

TorkLift Wiring Harness Extension for 36" SuperTruss or Cannon Hitch Extender - 7-Way RV

(67)

$130.90

Question:

I need a 18 reciever tube that will go into my OEM GMC 3 reciever hitch so I can put in a 2 weight distribution hitch trailer hitch

asked by: Don B

Expert Reply:

I have a hitch extension that will work with a weight distribution system but it is 24" long and there aren't any shorter ones. First you are going to have to use the Curt Hitch Receiver Reducer Sleeve item # C85JR to get your 3" receiver down to a 2-1/2"one. Then you will want the Curt Hitch Extension and Reducer item # C45048. It comes in a 34" extension but you can trim it down to 24".

This combination will give you a 8,000 lbs towing capacity when used with a weight distribution system. If you keep the length at 34" you will only have a 6,000 lbs towing capacity.

You will also need the 24" Wiring Harness Extension for Hitch Extenders item # TLW6024. This will extend your truck's 7-way connector the length of the extension when you trim it down. You will want item # TLW6036 if you keep the 34" length.

expert reply by: Jerred H