Demco Autoslide 5th Wheel Hitch For A 2021 Ford F-250 With OEM Prep Package

Question

Question:

Will this hitch work on a 2021 F-250 puck system

asked by: Dwayne S

0

Expert Reply:

Yes, the Demco Autoslide 5th Wheel Hitch w/ Slider # DM8550024 has the correct leg spacing to fit the pucks of your 2021 Ford F-250.

expert reply by: Kevin C

0

Answer 1

I attached a diagram and instructions on where and how often to grease the Demco Hijacker part #DM6077 that you have. It's recommended that you use white lithium grease like the part #L11354 for a cartridge for a grease gun.

view full answer...

Answer 2

It looks like you might have a Trailair Roto-Flex 5th Wheel Pin Box like #LC328330. I do recommend confirming this by locating the model name of your existing pin box. If this is the case, then to use the Demco Hijacker Autoslide 5th Wheel Trailer…

view full answer...

Answer 3

The Demco Hijacker Autoslide 5th Wheel Trailer Hitch #DM8550034 comes pre-greased from the factory but Demco does recommend keeping all moving parts well greased and lubricated over time as part of regular maintenance. They recommend simply applying…

view full answer...

Answer 4

I was able to confirm that you've got a Lippert 1621 pinbox on your 2021 Cougar Half-Ton 24RDS, so the Reese Goose Box 20,000 lbs #RP85FR you were looking at is exactly what you're looking for. This will be a good replacement for your 15.5k…

view full answer...

Answer 5

I can understand why you kept the Demco Auto Slide #DM8550024 on your 2016 Ford F350 because it can be pretty difficult hooking up when it's at an angle. You should be able to get the head moved but it may be difficult. One possible way to fix…

view full answer...

Answer 6

Hey Michael, thanks for reaching out. So, this is actually normal for the Demco autoslide, and to be honest, it is one of the only downfalls of their hitch design. It takes a tremendous amount of force to rotate the head, so if you disconnect at an…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Demco Autoslide 5th Wheel Hitch For A 2021 Ford F-250 With OEM Prep Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching