Correct 5th Wheel to Gooseneck Pin Box Adapter for a Keystone Cougar 29RKS

Question

Question:

Does a 2021 Keystone Cougar 29RKS have a Lippert 1621 Pin Box? Thanks.

asked by: John T

1

Helpful Expert Reply:

I did find that the Keystone Cougar 29RKS uses a Lippert 1621 pin box pattern so if you're looking for a fifth wheel to gooseneck adapter, I can confirm the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box part # GY58GR fits and it's what I recommend using.

expert reply by: Conner L

1

Answer 1

Gen-Y currently only shows their 5" Offset #GY43XR only fitting the 2017 and newer Ford Super Duty trucks. I have included a drawing with the dimensions for this below you can check and see if it will fit your 2012 Ford F-350. If not another…

view full answer...

Answer 2

The safe GVWR rating is 80-85% of total weight capacity to allow for any additional weight added to the trailer. So for a 16k pin box you'd be looking at 12,800lbs - 13,600lbs as a safe weight. I looked up your current pin box with the LCI Number…

view full answer...

Answer 3

I may have a solution for you to use your factory gooseneck setup, but there is not an offset gooseneck ball like the Curt 4" Offset Ball for Double-Lock Gooseneck Hitch #C602 designed to fit on the factory Ford prep package. With that said, you…

view full answer...

Answer 4

While you do have a longer short bed truck on your 2023 Ford F-350 whether or not a Goosebox like part #RP85FR or the Gen-Y #GY98GR would provide enough turning clearance comes down to the nose style of the trailer you have. If it's a tapered…

view full answer...

Answer 5

The main reason that RV's use 5th wheel hitches is they provide a smoother ride than gooseneck hitches. Since RV's generally carry fragile components like TV's and dishware as well as having decorative trim and glass lighting fixtures…

view full answer...

Answer 6

Both of the gooseneck hitches you mentioned would work well for you, but since you asked about which is made in the USA I would recommend the Curt part #C60720 as it is made in the USA and the Draw Tite is no longer made here. Since your truck is a…

view full answer...

Answer 7

In regards to a Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter like part #RP94720 and a Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like part #325-GH-8045, the main difference is that one uses air for…

view full answer...

Answer 8

We do have the Gen-Y Hitch Gooseneck Trailer Hitch #GY43XR which installs into your factory in bed hitch on your 2024 Ford F-250. This will provide you with a 2-5/16" hitch ball which is offset 5" from the factory mounting location. You…

view full answer...

Answer 9

That's really going to depend on your specific trailer. While the standard response from the industry is that if you have a short bed truck that you need a sliding 5th wheel hitch, that just isn't always the case. A lot of trailers are now…

view full answer...

Answer 10

It looks like trailers that come prepped with the Lippert Tire Linc have the repeater installed but not the sensors so in which case you can purchase the sensors separately using the Tire Sensors for Tire Linc TPMS part #LC97VR which are sold in…

view full answer...

Answer 11

The Tow Ready Safety Chain Kit part #49150 are what we recommend for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box part #GY58GR. They are 5/16" diameter which is perfect but the max is 3/8" diameter. The Fulton chains you…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Correct 5th Wheel to Gooseneck Pin Box Adapter for a Keystone Cougar 29RKS

Continue Researching