What Diameter Shackle Bolt Hole Does CE Smith Hanger CE14035G40 Have
Published 03/14/2023
Question:
This bracket I can only find with a 1/2 inch hole to mount the leaf spring. Is there a part number with the same bracket except with a 9/16 hole. I dont want to drill out the hole in the bracket I bought because it will start rusting. Thanks
asked by: Glenn Z
0
Expert Reply:
The CE Smith leaf spring hanger part # CE14035G40 that you referenced has 9/16 inch diameter holes for the shackle bolts which is the standard size so it would work well for you and would not require any drilling.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Accessories and Parts
- Trailer Suspension Parts
- Brackets
- CE Smith
more information >
Continue Researching
- Search Results: slipper springs trailer leaf springs
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Looking For Bolt-On Hanger Kit And U-Bolts For 1-3/4" Round Axle
- Shop: Terran Axle Single-Axle Hanger Kit for Double Eye Springs - 1-1/2" Tall Front
- Q&A: Dimensions of CE Smith Front/Rear Hanger Bracket # CE14035G40
- Q&A: Compatibility of Trailer Suspension Hanger on 2 x 2 Inch Frame
- Q&A: Can Front and Rear Trailer Suspension Hangers be the Same Height with Off-Level Leaf Springs
- Q&A: Replacement Hangers for 3500 LB Tandem Axle
- Q&A: Replacement Hangers for Single Axle Trailer
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-1/4" Long
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Single-Axle Trailer Hangers for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Shop: Dexter Single-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 5-1/4" Front