Replacement Hangers for Single Axle Trailer
Updated 07/19/2022 | Published 07/16/2022
Products Featured in This Question
Question:
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2 Front, 1-1/4 Rear Item # APS3 Is there a hanger like this that doesnt require welding? Thx.
asked by: Todd F
Expert Reply:
The only hanger kits we have that are bolt on are the # CE14035G40 and # CE14026G. Your typical double-eye leaf spring is going to be 1-3/4" wide so neither of these would work. This means the only option would be weld-on hangers.
For replacement hangers you want to choose the same size you currently have. The width will always be 1-3/4" so you will need the height which is the distance from center of bolt hole to the top of the hanger. The same is true for shackles. The # APS3 has 1-1/2" tall hangers, 1-1/4" tall rear hangers, and 3-1/8" long shackle straps. If this matches what you currently have then this kit would be a good fit.
I have attached a helpful article on leaf spring suspension for your reference.
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: leaf spring hanger
- Search Results: trailer safety chains
- Search Results: leaf spring mounts
- Search Results: leaf spring hangers
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
- Video: Review of CE Smith Trailer Suspension Parts - Hangers - CES65WR
- Search Results: balance
- Search Results: galvanized equalizer
- Search Results: leaf spring hanger brackets
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Shop: Buyers Products 3/8" x 42" Class 4 Trailer Safety Chain with 1 Clevis Hook - 43 Proof
- Shop: Laclede 35" Long Trailer Safety Chain w/ Clevis Slip Hook - 5,400 lbs Weight Capacity - Qty 1
- Shop: CE Smith U-Bolt - Galvanized - 4-13/16" Long x 2-1/16" Wide x 1/2" Diameter - Qty 1
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Q&A: Bolt Hole Dimensions for CE Smith Front/Rear Hanger Bracket for Double-Eye Springs
- Video: Review of the CE Smith Front/Rear Hanger Bracket for Double-Eye Springs
- Article: Slipper Spring Trailer Suspension System Review
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Q&A: Looking For Bolt-On Hanger Kit And U-Bolts For 1-3/4" Round Axle
- Q&A: Can Front and Rear Trailer Suspension Hangers be the Same Height with Off-Level Leaf Springs
- Q&A: Replacement Hangers for 3500 LB Tandem Axle
- Q&A: What Diameter Shackle Bolt Hole Does CE Smith Hanger CE14035G40 Have
- Q&A: Compatibility of Trailer Suspension Hanger on 2 x 2 Inch Frame
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage