Looking For Bolt-On Hanger Kit And U-Bolts For 1-3/4" Round Axle
Updated 09/30/2025 | Published 04/29/2025 >
Products Featured in This Question
Question:
Hi What hanger kits do you offer, to mount leaf spring sp-177275 to a 1 3/4 round axle, that is bolt -on. I cant weld. Thanks!
asked by: David S
Expert Reply:
Hello David, thanks for reaching out. I can't weld either, at least not well lol. We do have a bolt on hanger kit, the CE Smith Spring Hanger Bracket Kit # CES22QR which works with 1-3/4" wide slipper springs.
Then for a U-Bolt kit you can use part # CE23000 which is for a 1-3/4" round axle.
Please let me know if there is anything else I can do to help.

David S.
9/26/2025
Hi Jesse I never ended up using that 1 3/4 axle after all, so I cannot give you any feedback. I was originally going to use that axle on a small trailer that I could tow with my Honda accord. I have since sold the Honda Accord and bought a Subaru Outback and now I can tow my large trailer . I have no need to modify the small trailer now. I'm glad you were there for me though.




Dave S.
9/29/2025
Hi again When I stated earlier about tire diameter being critical , I meant that all four tires have to be the same diameter to each other within like less than 1/8. So I guess frequent rotations might be necessary, and I would choose a non-directional tire so you can cross rotate when needed.

Product Page this Question was Asked From
CE Smith Spring Hanger Bracket Kit - Bolt On
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Single Axle
- CE Smith
more information >
Continue Researching
- Search Results: slipper springs trailer leaf springs
- Shop: CE Smith Spring Hanger Bracket Kit - Bolt On
- Article: Slipper Spring Trailer Suspension System Review
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Shop: Terran Axle Single-Axle Hanger Kit for Double Eye Springs - 1-1/2" Tall Front
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Q&A: Dimensions of CE Smith Front/Rear Hanger Bracket # CE14035G40
- Q&A: What Diameter Shackle Bolt Hole Does CE Smith Hanger CE14035G40 Have
- Q&A: Replacement Hangers for 3500 LB Tandem Axle
- Q&A: Replacement Hangers for Single Axle Trailer
- Q&A: Can Front and Rear Trailer Suspension Hangers be the Same Height with Off-Level Leaf Springs
- Q&A: Compatibility of Trailer Suspension Hanger on 2 x 2 Inch Frame
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-1/4" Long
- Shop: CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long


Jesse M.
9/26/2025
Hey David, did the bolt-on hanger kit and U-bolt kit work out for mounting your leaf spring to the axle? I'm asking because your experience could help others looking for a similar solution.